06-27-2018 05:15 AM
Solved! Go to Solution.
06-27-2018 06:08 AM
06-27-2018 06:08 AM
06-27-2018 07:55 AM - edited 06-27-2018 07:59 AM
Ok, I look at the control panel and the drive is that:
I go to the Hardware Compability List, and see that this Drive is Retiring from the Support:
I will try to restart the server in some days and look if it work. Thanks for your help.
06-27-2018 08:47 AM
You mentioned a library. Are you using a robotic tape library? If so, which one, as you need to look int he HCL for the robotic library and drive pair.
The section of the HCL in your screenshot:
1) is for stand-alone tape drives, not robot & drive pairs
2) says the support will be ending in the NEXT version of Backup Exec. The drive you pointed to would still be supported in this version of Backup Exec.
06-27-2018 10:12 AM
@Larry_Fine wrote:You mentioned a library. Are you using a robotic tape library? If so, which one, as you need to look int he HCL for the robotic library and drive pair.
The section of the HCL in your screenshot:
1) is for stand-alone tape drives, not robot & drive pairs
2) says the support will be ending in the NEXT version of Backup Exec. The drive you pointed to would still be supported in this version of Backup Exec.
I´m use a Single Tape Driver inside a Dell Server with the version 16, and the HCL says: "The devices in this section will not be listed as supported in the Hardware Compatibility List for the next major Backup Exec release after Backup Exec 15", but it still working for some months, and stop to work on this week now.
06-27-2018 02:09 PM
@rcunha wrote:
@Larry_Fine wrote:You mentioned a library. Are you using a robotic tape library? If so, which one, as you need to look int he HCL for the robotic library and drive pair.
The section of the HCL in your screenshot:
1) is for stand-alone tape drives, not robot & drive pairs
2) says the support will be ending in the NEXT version of Backup Exec. The drive you pointed to would still be supported in this version of Backup Exec.
I´m use a Single Tape Driver inside a Dell Server with the version 16, and the HCL says: "The devices in this section will not be listed as supported in the Hardware Compatibility List for the next major Backup Exec release after Backup Exec 15", but it still working for some months, and stop to work on this week now.
That is probably a typo in the BE 16 HCL "Retiring soon" section.
The BE 16 HCL still shows this as supported.
The BE 20 HCL does not show it as supported. The BE 20 HCL puts that tape drive in the "Support End-of-Life" section.
If restarting the BE services doesn't fix the discovery, then rebooting or power cycling the server is the next step.