12-04-2014 04:54 AM
Hi Forum,
Using BE2012 SP1, Win2008 R2 SP1, to LTO5 via FC.
I've duplicated some backup-sets to tape, and used h/w encryption.
When I run a verify on the backup-set on tape, I don't get asked to supply which encryption key to use for the verify job, and so the verify job fails with:
Verify 00002 -- The job failed with the following error: Validation failed because of invalid encryption settings. An encryption type was specified but an encryption key was not provided.
Where do I specify which encryption key to use for a verify job?
Thanks.
Solved! Go to Solution.
12-04-2014 05:24 AM
Please check the TN below:
http://www.symantec.com/business/support/index?page=content&id=TECH191715
Thanks!
12-04-2014 05:24 AM
Please check the TN below:
http://www.symantec.com/business/support/index?page=content&id=TECH191715
Thanks!
12-05-2014 08:55 AM
Thanks Craig.
I'm planning to update to SP4 very soon.
Is there anything like an LBN page for BE ?
And anything for BE like NBU's EEB listing doc?
12-16-2014 10:26 PM
...not sure why I didn't respond here, but not sure what LBN or EBB is?
Thanks!
12-17-2014 12:27 AM
Nopes, there isn't one for BE currently. (LBN -Late Breaking News & EEB - Emergency Engineering Binary). Closest one is https://www-secure.symantec.com/connect/backup-and-recovery/issues
BE doesn't provide EEBs, instead it releases hotfixes and service packs. Upon a particular release, it contains information as to what has been fixed.
Though its a good idea for BE to have a similar page like LBN. Would recommend to post it as an Idea.
02-19-2015 04:33 AM
Thanks Craig.
02-19-2015 04:46 AM
...glad to have helped!