05-09-2011 01:04 AM
Hello,
I need to change our tape drive to a HP StorageWorks 1 / 8 G2 Tape Autoloader (includes tape drive).
is there anything I should be aware of when I switch and can anyone outline a brief walkthrough?
Solved! Go to Solution.
05-09-2011 01:28 AM
Hi Emort,
...on top of this, I'd suggest getting hold of the latest Symantec drivers for your version of BE. Install them.
Once done, and the autoloader is detected in Windows, open up Backup Exec and then run the device configuration wizard. This will allow you to install the drivers within Windows for the unit.
You can also select the option to delete non-existant hardware, which I'd suggest.
Go to Devices, and check if the old device is showing up...if it still does, manually uninstall it.
Then make the change in your jobs to point to the new device.
Thanks!
05-09-2011 01:13 AM
Most important thing to check is the compatibility of the hardware with the version of Backup Exec
that is installed. Once the hardware is replaced make sure its detected by the OS.
05-09-2011 01:28 AM
Hi Emort,
...on top of this, I'd suggest getting hold of the latest Symantec drivers for your version of BE. Install them.
Once done, and the autoloader is detected in Windows, open up Backup Exec and then run the device configuration wizard. This will allow you to install the drivers within Windows for the unit.
You can also select the option to delete non-existant hardware, which I'd suggest.
Go to Devices, and check if the old device is showing up...if it still does, manually uninstall it.
Then make the change in your jobs to point to the new device.
Thanks!
05-23-2011 01:27 AM
Good advice!
one q:
Where do i find latest Symantec drivers ?
and ill let you know how it goes
05-23-2011 01:31 AM
...you can find them here:
...just filter for your version of BE (which you don't state)...
05-23-2011 01:31 AM
What is the version of Backup Exec you are using ?
05-23-2011 06:19 AM
2010 r2
05-23-2011 06:24 AM
Latest Device drivers installer for R2 and R3 http://www.symantec.com/docs/TECH158750
05-25-2011 10:46 AM
thanks for all your help it worked smoothely!
only thing is that i now seem to have a performance issue when I backup to the new tapes
but will create a new post on this