03-25-2009 05:50 AM
Error category : Server ErrorsMy configuration is as follows:
Error : e000fe30 - A communications failure has occurred.
For additional information regarding this error refer to link V-79-57344-65072
04-05-2009 02:48 PM
04-14-2009 10:23 AM
04-14-2009 12:34 PM
Make sure the VSS is enabled in services...in backup exec select use shadow copy or vss can't remember which one it is...I've seen this error on DC before...
I would test with two different jobs, one for data and see if it finishes without failures and one with just the shadow components...the other way to test would be use NTBackup and see if that works...
I also found this article that says Symantec is aware of the problem.
http://seer.entsupport.sym
04-14-2009 12:35 PM
Make sure the VSS is enabled in services...in backup exec select use shadow copy or vss can't remember which one it is...I've seen this error on DC before...
I would test with two different jobs, one for data and see if it finishes without failures and one with just the shadow components...the other way to test would be use NTBackup and see if that works...
I also found this article that says Symantec is aware of the problem.
http://seer.entsupport.symantec.com/docs/285437.htm
Please go therough this document and then verify:
http://support.veritas.com/docs/262333
Also download this utility in order to check that the port 10000 is not being used by any other port :
http://www.sysinternals.com/Utilities/TcpView.html
Under what account is the Remote agent service running? It MUST always run under Local System account on the Backup server as well as on the remote server!