cancel
Showing results for 
Search instead for 
Did you mean: 
Cluster Server

Discussion Posts

Unable to install cpi-Patch-6.1.0.600 cpi-Patch-6.1.1.500

ENVIRONMENT   OS = Redhat 5.9 (64bit) SFHA = 6.1 Total cluster nodes = 2   QUERY   There are following 7 patches for SFHA 6.1   vm-rhel5_x86_64-Patch-6.1.1.400 cpi-Patch-6.1.0.600 cpi-Patch-6.1.1.500 gab-rhel5_x86_64-Patch-6.1.0.100 fs-...

Zahid_Haseeb by Moderator
Partner    VIP    Accredited
  • 480 Views
  • 1 replies
  • 1 kudos

Using Veritas Cluster for HA Active/Active

Hi All. In my company, we are working implementing HA to my Solaris server that use LDOMS, at this moment we have 1 server with 1 storage, the objective is to implement a second server and storage. I would like to have your recommendations about th...

Resolved! Difference between CVM Nid, CM Nid, cat /etc/llthosts

Hello Team,  I usually check /etc/llthosts to find which is masternode in CVM cluster i.e. 0- measn that is the master node. But vxdctl -c  mode gives a different nodes as master. I am little confused here that we do not need to look /etc/llthosts t...

Athiri by Level 3
  • 1407 Views
  • 3 replies
  • 0 kudos

NIIC Monitor counting vlan tagged packet

  Hi, I have the following set up on my cluster: The main interface eth0 And 2 vlan tagged interfaces eth0.100 eth0.200 Each interface has been plumbed with an IP and I have a NIC resource set up to monitor them Seeing as the server is a HP ...

rossa by Level 2
  • 482 Views
  • 0 replies
  • 0 kudos

Errors in dmpevent.log file

Hi ,     I am seeing below errror messages in dmpevent.log /var/adm/vx/dmpevents.log   Mon Mar 28 11:23:27.786: SCSI error occured on Path sdv: opcode=0x5f reported reservation conflict  (status=0xc, key=0x0, asc=0x0, ascq=0x0)  Mon Mar 28 11:...

symsonu by Level 6
  • 1034 Views
  • 3 replies
  • 0 kudos

High Availability Agents - Agent Pack - 1Q2016 release

Veritas High Availability Agent Pack 1Q 2016 is now available on SORT: https://sort.veritas.com/agents. Application Agents Added support for JBoss 8.x and 9.x. The JBoss Application Server 8.0 and later releases are now known as WildFly.Added suppo...

Resolved! Automatic Failover

I would like to use Veritas Cluster Server to achieve high availability and automatic fail over for my applications.   These application are java applications with some services with the backend databases using Sybase   The java applications can ...

haditeo by Level 2
  • 749 Views
  • 1 replies
  • 0 kudos

Can HAD start without I/O fencing?

I want to remove I/O fencing completely and start VCS (in test environment), but every time I fire hastart command, HAD tries to start I/O fencing driver and fails to start HAD. I have removed the registered key, disabled fencing in /etc/vxfenmode fi...

services not started after node reboot in VCS 5.1

Hello,   we have a 4 node VCS 5.1 cluster (EngineVersion 5.1.10.40) configured with I/O fencing.  2 of the nodes are for the applications and the other 2 for the DB. Applications and the DB are configured to run only on the designated nodes. We a...

Resolved! Application restart needs database restart also

Hi Can I create an extra dependency between this two main Resources I have? I have a Service Group with two main Agent Resources, next to the usual Resources (storage, networking, ...) : an Application Agent Resource Type for my applicationa Datab...

sanderfiers by Level 3
Partner Accredited
  • 933 Views
  • 3 replies
  • 0 kudos

Resolved! CleanProgram Attribute for Application Resource

Hi, I am in need for more detailed information on the CleanProgram Attribute for the Application Resource. I could not find any information in the documentation (including the Application Agent Configuration Guide) regarding this topic. Is there a...

sanderfiers by Level 3
Partner Accredited
  • 1408 Views
  • 3 replies
  • 0 kudos

LLT heartbeat link status changed

Hi Community,   I'm having a problem in my cluster, I'm having two nodes in cluster,I'm trying to add new node to the cluster, when I booted up the new node I got  and errors on the current cluster, I guess the new node is trying to join the cluste...

Luay by Not applicable
  • 1012 Views
  • 1 replies
  • 0 kudos

Resolved! VCS engine (had) cann't start automatically

 this is the only node of the cluster1 that I am trying to start VCS. as my experience, after SFHA installation, the veritas can start automatically with Solaris OS boot. the below is the procedure of my operation 1.after SFHA installation, I foun...

Resolved! VCS engine (had) cann't start automatically

 this is the only node of the cluster1 that I am trying to start VCS. as my experience, after SFHA installation, the veritas can start automatically with Solaris OS boot. the below is the procedure of my operation 1.after SFHA installation, I foun...

Resolved! VCS agent

Hello, In windows, there are many vcsagent runs. How do we map the agent name from the taskmgr list?

mokkan by Level 6
Certified
  • 395 Views
  • 1 replies
  • 0 kudos

unable to start mysql rhel6.5 - vcs (6.2)

=   =   =   =   =   =   =   =   =   =   =   =   =   =   =   =   =   =   =   =   =   =   =   =   =   =   = Following are the settings in main.cf group app_servicegroup (         SystemList = { node71 = 0, node72 = 1 }         AutoStartList = { nod...

S_D1 by Level 2
Employee
  • 407 Views
  • 2 replies
  • 0 kudos