02-14-2011 06:10 AM
Hi,
I am using Enterprise Vault 8.0.4 and have just created a lab environment for some testing. Everything is working so far but for some reason I have a minor issue whereby I am unable to see the System Status in the Administraton Console (in the status pane.) I have checked, and under site properties monitoring is enabled for the site with multiple alerts. I also ran the Operations Manager Web App Configuration wizard just incase the system status information was actually just some sort iframe that was displaying data from that site or something silly. Is there any reason why I wouldn't be seeing the Status option?
Its driving me crazy! It must be something so obvious I am missing?
Thanks :)
02-14-2011 06:16 AM
Hello JJ
Wait. It should show immediately. You maght want to rightclick on it, and then do a re-run checks.
GJ
02-14-2011 06:28 AM
Hi GJ,
Thanks for your reply. I finished setting up my lab environment last night. I will wait until tomorrow and see if it appears.
Thanks for your help - it just looks like I might have been a little impatient!
James Clements
02-15-2011 02:08 AM
I have waited but I still cannot see the System Status in the admin console! Am I missing something here? Do I need to install or configure something else?
James Clements
02-15-2011 02:17 AM
No errors? Anything in eventlog? Is your dotnet properly configured?
What happens if you rightclick the 'status overview' in the console and do a 'refresh'?
02-15-2011 02:39 AM
Hi GJ,
That's the issue - I cant see the status overview in the console! Is there something I need to do to enable the status overview? Screenshot attached :)
James
02-15-2011 03:41 AM
install dotnet 3.5SP1 (or verify it is installed properly). If installed, you might need to re-register.
check regkey hklm\software\microsoft\NET Framwork Setup\NDP\v3.5 if it exists and if it has a value called Install = 1
re-register = something like "
aspnet_regiis -i
run deploymentscanner to verify it is ok.
02-15-2011 04:37 AM
dotnet 3.5 sp1 is installed.I checked the regkey and install was already set to 1.
I have re-registered all versions of dotnet (excluding 3.5 as it is not a standalone framework it is only an extension of the v2 dotnet framework) and still I dont have the System Status in the Admin Console!
I am not missing a separate component that needs to be installed or something hrere am I?
02-15-2011 04:47 AM
Hi JJ,
Sorry, I'm drawing a blank here. I'd suggest you contact support on this.
02-15-2011 05:18 AM
Hi,
sometimes it`s occur when you working with Hyper-v\Vmware
try to reinstall Enterprise vault bin files.
Ronen
02-15-2011 05:48 AM
Well I didnt want to have to install SP5 because the System Status indicator should have been working with SP4 but after installing SP5 this issue has been resolved. I now have the System Status indicator in the Admin Console.
Thanks to everyone that offered assistance :)
02-15-2011 05:58 AM
Hello JJ,
Can you please mark a post as a solution?
Thanks.