Got a strange one here- putting in an all-in-one PD 6.2.1 system, and the OS won't totally recognize logical volume 2. Logical Volume 1 is on the same controller, and that's where the /boot, swap, /, and etc. live. It works fine- the server boots up with no problem.
The server is an HP dl320s with a smartarray p800 controller- the HP Array Configuration Utility sees both volumes, and tells me that Logical Volume 2 is /dev/cciss/c0d1
But Fdisk tells me : Unable to read /dev/cciss/c0d1
parted says: Error: Unable to open /dev/cciss/c0d1 - unrecognised disk label.
When I try to mklabel gpt, I get:
Error: Can't have the end before the start!
Error: Can't have a partition outside the disk!
Error: No space left on device during write on /dev/cciss/c0d1
Retry/Ignore/Cancel?
BTW- Logical Volume 2 is 2.7TB
Anyone have any experience with this? Any thoughts?
Message Edited by Tom Burrell on
01-28-2008 11:00 AM