BPSTULIST Command

[H_Sharma]

Hello Experts,

Just need to know whitc switch needs to be added in the below command so that below command shows the disk space used and total.

C:\Program Files\Veritas\NetBackup\bin\admincmd>bpstulist -U

Label:                IC
Storage Unit Type:    Disk
Media Subtype:        Basic (1)
Host Connection:      exchange01
Concurrent Jobs:      1
On Demand Only:       yes
Path:                 "D:\IC"
Robot Type:           (not robotic)
Max Fragment Size:    524287
Max MPX:              1
Stage data:           no
Block Sharing:        no
File System Export:   no
High Water Mark:      98
Low Water Mark:       80
Ok On Root:           no

In GUI i can see the same thing in reports.

Disk_Staging    exchange01    1.999 GB    38.2812 MB    1.9616 GB    98    80    1    D:\PKA    -    BasicDisk

[sri_vani]

http://www.symantec.com/business/support/index?page=content&id=TECH129237

http://www.symantec.com/business/support/index?page=content&id=HOWTO34621

The total capacity, used capacity and percentage free space can be obtained from 'nbdevquery -listdv -stype <storage_type> -dp <disk_pool>'. In case of BasicDisk storage units, use the label of the storage unit as the disk pool.

# nbdevquery -listdv -stype BasicDisk -dp basicstu

V6.5.5 basicstu BasicDisk Internal_16 @aaaag 142.37 117.03 17 1 0 1 0 0

bollywood:~>nbdevquery -listdv -stype BasicDisk -dp basicstu -U

Disk Pool Name : basicstu

Disk Type : BasicDisk

Disk Volume Name : Internal_16

Disk Media ID : @aaaag

Total Capacity (GB) : 142.37

Free Space (GB) : 117.03

Use% : 17

Status : UP

Flag : OkOnRoot

Flag : ReadOnWrite

Flag : AdminUp

Flag : InternalUp

Num Read Mounts : 0

Num Write Mounts : 1

Cur Read Streams : 0

Cur Write Streams : 0the complete command might look like the following.

nbdevquery -listdv -stype BasicDisk -dp NameBasic -D

The value is listed as potential_free_space.

Disk Volume Dump
  name                : <Internal_16>
  id                  : <C:\>
  diskpool            : <NameBasic::server1::BasicDisk>
  disk_media_id       : <@aaaaf>
  total_capacity      : 0
  free_space          : 0
  potential_free_space: 0
  committed_space     : 0
  precommitted_space  : 0
  nbu_state           : 2
  sts_state           : 0
  flags               : 0x6
  num_read_mounts     : 0
  max_read_mounts     : 0
  num_write_mounts    : 1
  max_write_mounts    : 1
  system_tag          : <Generic disk volume>

[H_Sharma]

Hello Sri Vani,

If i run the below command. Pls find the output. I have created some basic disk named as IB, IC and ID etc.

Pls let me know if i am missing something :)

C:\Program Files\Veritas\NetBackup\bin\admincmd>nbdevquery -listdv -stype BasicD
isk -dp NameBasic -D
DSM was unable to find the following disk pool: NameBasic(BasicDisk)@exchange01
failed to get disk volume list information, invalid command parameter

[Amol_Nair]

Plz check the name of the disk pool or the volume name that you are specifying.. Or Run the command without the "-dp" switch. You can also run it without the -stype switch.. nbdvquery-listdv-U

[sri_vani]

Are you openining the conmmand prompt run as admin?

[H_Sharma]

Hi Srivani,

I am running with admin rights :(

[Mark_Solutions · Accepted solution]

Try:

nbdevquery -listdp -stype BasicDisk

You can use -L, -l or -U on the end of the command to change the output format - will report on all of your basic disk pools

nbdevquery -listdv -stype BasicDisk

gives  a similar output