I have two Windows Server 2008 r2 Domain Controllers that are running netbackup Client version 7. The master server is Solaris 10 running Netbackup 7.0.1.
I have a backup policy that backups up ALL LOCAL DRIVES.
Both backups have partial completions with the follwoing errors;
30-May-2013 17:00:00 - requesting resource Any
30-May-2013 17:00:00 - requesting resource p5backup1.NBU_CLIENT.MAXJOBS.XXXXX
30-May-2013 17:00:00 - requesting resource p5backup1.NBU_POLICY.MAXJOBS.ActiveDirectory_SysState
30-May-2013 17:00:00 - granted resource p5backup1.NBU_CLIENT.MAXJOBS.XXXXX
30-May-2013 17:00:00 - granted resource p5backup1.NBU_POLICY.MAXJOBS.ActiveDirectory_SysState
30-May-2013 17:00:00 - granted resource LGP834
30-May-2013 17:00:00 - granted resource HP.ULTRIUM4-SCSI.001
30-May-2013 17:00:00 - granted resource p5backup1-hcart-robot-tld-0
30-May-2013 17:00:02 - estimated 10269434 kbytes needed
30-May-2013 17:00:05 - started process bpbrm (pid=18747)
30-May-2013 17:00:11 - mounting LGP834
30-May-2013 17:00:20 - connecting
30-May-2013 17:00:20 - connected; connect time: 0:00:00
30-May-2013 17:01:55 - mounted LGP834; mount time: 0:01:44
30-May-2013 17:01:56 - positioning LGP834 to file 135
30-May-2013 17:03:33 - positioned LGP834; position time: 0:01:37
30-May-2013 17:03:33 - begin writing
30-May-2013 17:13:38 - Warning bpbrm (pid=18782) from client XXXX: WRN - can't open file: System State:\SYSVOL\SYSVOL\68025f15-74aa-46ef-86xxxxxxxxxxx29 (WIN32 536935992: Unknown error)
30-May-2013 17:13:38 - Error bpbrm (pid=18782) from client XXXXX: ERR - Error encountered while attempting to get additional files for System State:\
30-May-2013 17:16:23 - end writing; write time: 0:12:50
the requested operation was partially successful (1)
I need to resolve the issue so there is no aprtial completetion. I have dones the following;
1. run a ntbackup of ssytem state using CLI - works fine no errors
2. checked Windwos event logs nothing present
3. Check status of VSS providers and writes. all appers to be fine.
When i run the vssadmin list providers command only the MS SSC provider is listed.
As mentioned this is happening on two different domain controllers in two different domains. the policy it fails on each time is the same one for each Domain Controller, (but obviously different for each doamin).
Can anyone help
