11-13-2015 02:15 AM
Hi all,
I have a problem with a job that need to duplicate a copy to two tapes in one tape drive.
A second copy of tape finish with error "status 2001".
I founded this fix in veritas web site but didn´t resolve.
https://www.veritas.com/support/en_US/article.000023647
Can anybody help me?
Thanks.
Solved! Go to Solution.
11-13-2015 05:33 AM
That file has a | bpsetconfig at the end, the suggestion from me above was to run that echo statement as a command on the command prompt.
SLP.DISABLE_ITC_LOGIC = 1 | bpsetconfig
Remove the | bpsetconfig from the nbcl.conf file
11-13-2015 03:19 AM
Can you post the contents of the file?
11-13-2015 03:27 AM
try
echo SLP.DISABLE_ITC_LOGIC=1 | bpsetconfig
11-13-2015 05:09 AM
Thanks Revaroo, but not runnig yet.
See the content of the file attached.
Thanks.
11-13-2015 05:33 AM
That file has a | bpsetconfig at the end, the suggestion from me above was to run that echo statement as a command on the command prompt.
SLP.DISABLE_ITC_LOGIC = 1 | bpsetconfig
Remove the | bpsetconfig from the nbcl.conf file
11-13-2015 07:45 AM
Ok Revaroo, but you ask me to put |bpsetconfig in the end of it, before this already wasn´t running.
So, I will remove it.
Thanks.
11-13-2015 03:04 PM