10-21-2014 02:26 PM
Hi
I removed one SLP used for duplicate images from DataDomain to physical tapes.
But the duplications job remain executing without any logic.
I stopped and started NBU, without unsuccessfully.
I reboot the server and the same result, duplications job still remain running.
As appears one process is in loop in EMM, I guess.
How can I stop this loop?
Master server is a linux 2.6.32-358.32.3.el6.x86_64, NBU is 7.5.
Thanks
Solved! Go to Solution.
10-22-2014 10:52 AM
To list all of the waiting duplications to the tape drives from this SLP, enter:
nbstlutil stlilist -lifecycle ddnicpe0100_prod_full -destination nims0102man-hcart2-robot-tld-0 -image_incomplete
This will list all of the images that are still trying to write to tape from that lifecycle. If you want to cancel all of them, you can try entering this command:
nbstlutil -cancel -lifecycle ddnicpe0100_prod_full -destination nims0102man-hcart2-robot-tld-0 -force
Then enter the first command above to make sure they are all properly cancelled, and not just waiting for their next increment of time to run.
10-21-2014 02:36 PM
10-21-2014 02:49 PM
Hi
That command stop a specific job, but how can I to stop all the duplication daemons?
10-21-2014 02:57 PM
$ ./nbstlutil stlilist | grep tld-0
V7.5.0 C nims0102man-hcart2-robot-tld-0 1 1
V7.5.0 C nims0102man-hcart2-robot-tld-0 1 1
V7.5.0 C nims0102man-hcart2-robot-tld-0 1 1
V7.5.0 C nims0102man-hcart2-robot-tld-0 1 1
V7.5.0 C nims0102man-hcart2-robot-tld-0 1 1
V7.5.0 C nims0102man-hcart2-robot-tld-0 1 1
V7.5.0 C nims0102man-hcart2-robot-tld-0 1 1
V7.5.0 C nims0102man-hcart2-robot-tld-0 1 1
V7.5.0 C nims0102man-hcart2-robot-tld-0 1 1
V7.5.0 C nims0102man-hcart2-robot-tld-0 1 1
V7.5.0 C nims0102man-hcart2-robot-tld-0 1 1
V7.5.0 C nims0102man-hcart2-robot-tld-0 1 1
V7.5.0 C nims0102man-hcart2-robot-tld-0 1 1
V7.5.0 C nims0102man-hcart2-robot-tld-0 1 1
V7.5.0 C nims0102man-hcart2-robot-tld-0 1 1
V7.5.0 C nims0102man-hcart2-robot-tld-0 1 1
V7.5.0 C nims0102man-hcart2-robot-tld-0 1 1
V7.5.0 C nims0102man-hcart2-robot-tld-0 1 1
V7.5.0 C nims0102man-hcart2-robot-tld-0 1 1
V7.5.0 C nims0102man-hcart2-robot-tld-0 1 1
V7.5.0 C nims0102man-hcart2-robot-tld-0 1 1
V7.5.0 C nims0102man-hcart2-robot-tld-0 1 1
V7.5.0 C nims0102man-hcart2-robot-tld-0 1 1
V7.5.0 C nims0102man-hcart2-robot-tld-0 1 1
V7.5.0 C nims0102man-hcart2-robot-tld-0 1 1
V7.5.0 C nims0102man-hcart2-robot-tld-0 1 1
V7.5.0 C nims0102man-hcart2-robot-tld-0 1 1
V7.5.0 C nims0102man-hcart2-robot-tld-0 1 1
V7.5.0 C nims0102man-hcart2-robot-tld-0 1 1
V7.5.0 C nims0102man-hcart2-robot-tld-0 1 1
V7.5.0 C nims0102man-hcart2-robot-tld-0 1 1
V7.5.0 C nims0102man-hcart2-robot-tld-0 1 1
V7.5.0 C nims0102man-hcart2-robot-tld-0 1 1
V7.5.0 C nims0102man-hcart2-robot-tld-0 1 1
V7.5.0 C nims0102man-hcart2-robot-tld-0 1 1
V7.5.0 C nims0102man-hcart2-robot-tld-0 1 1
V7.5.0 C nims0102man-hcart2-robot-tld-0 1 1
V7.5.0 C nims0102man-hcart2-robot-tld-0 1 1
V7.5.0 C nims0102man-hcart2-robot-tld-0 1 1
Is this normal ?
10-21-2014 03:56 PM
10-22-2014 06:45 AM
But the problem is that I dont want to desactivate the SLP completely, the SLP have 3 steps.
first step is backup to the PROD Data Domain
second step is duplicate to DR Data Domain
and the 3er step is duplications from DR Data Domain to physical tapes, this step was removed, but is running and running again, but ... in the "SLP" does not appears this step ...
SLP name is : ddnicpe0100_prod_full and this 2 steps are into this SLP
Backup ddnicpe0100_prod_su -- -- Fixed 6 months -- No No
Duplication ddnicle0200_dr_su -- -- Fixed 3 months -- No No
the 3er steps was removed and was for duplicaction from DDnicle0200_dr_su to
nims0102man-hcart2-robot-tld-0 into physical tapes.
This step was removed and run again and again without any logic.
Any idea what is happen?
Clear cache did not work.
Thanks
10-22-2014 08:50 AM
10-22-2014 10:27 AM
It sounds like you made a change to an existing Storage Lifecycle Policy, you did not delete it.
Changing the SLP steps in the SLP configuration has no effect on any already-running backups that specify that SLP, nor does it prevent any remaining duplications that were defined, before the change was made.
If these duplications really are running because the backups started before your SLP change, and you don't want the images to duplicate to tape, you must run the "nbstlutil cancel -backupid xxxxxxx" to cancel the remaining duplication to tape.
10-22-2014 10:38 AM
Yes, not express myself properly, is my fault, the SLP was changed, no deleted, I just remove the duplication to the tape, and this duplications run and run again.
Backup | ddnicpe0100_prod_su | -- | -- | Fixed | 6 months | -- | No | No |
Duplication | ddnicle0200_dr_su | -- | -- | Fixed | 3 months | -- | No | No |
This the status actual from the SLP, existed a third step, I removed it, but the duplication still remain.
How Can I list the remaining duplication to tape?
Thanks to both.
10-22-2014 10:52 AM
To list all of the waiting duplications to the tape drives from this SLP, enter:
nbstlutil stlilist -lifecycle ddnicpe0100_prod_full -destination nims0102man-hcart2-robot-tld-0 -image_incomplete
This will list all of the images that are still trying to write to tape from that lifecycle. If you want to cancel all of them, you can try entering this command:
nbstlutil -cancel -lifecycle ddnicpe0100_prod_full -destination nims0102man-hcart2-robot-tld-0 -force
Then enter the first command above to make sure they are all properly cancelled, and not just waiting for their next increment of time to run.
10-23-2014 11:10 AM
Thanks RonCaplinger and mph999 for your help.
As I read, I saw that is recomended to desactive SLP before to change.
Regards