06-12-2012 06:33 AM
Error bptm (pid=xxxxx) error requesting media. Tp Errno=Robot operation failed.
Warning bptm (pid=xxxxx) media id xxxxxx load operation reported an error.
Result...backups are not happening.
We are using NB 7.0.1 for unix.
So far I've restarted daemons....no change...then powered off / up our tape library...still no change.
I will next be checking to see if tapes are labeled/loaded correctly.
Any further ideas would be helpful...Thank you.
06-12-2012 06:43 AM
What does the syslog/message file say ?
06-12-2012 06:45 AM
Troubleshooting Robot or Drive Issues in NetBackup
http://www.symantec.com/business/support/index?page=content&id=TECH169477
There's a section in this T/N for that exact error - use robtest to determine functionality
06-12-2012 06:46 AM
Use robtest to test mount/dismount of tapes. See http://www.symantec.com/docs/TECH83129
Ensure that you have VERBOSE entry in /usr/openv/volmgr/vm.conf (restart NBU to enable) to ensure device-level actions and errors are logged to syslog (e.g. /var/adm/messages in Solaris).
06-12-2012 08:30 AM
1)Also check for thr /usr/openv/volmgr/debug logs.
2)As maria said try for robtest and move the tape from slot to drive.
3)U mentioned u restarted the daemons...go for library recycle and then the media server reboot.
4)Go in the /usr/openv/netbackup/logs and check for cat <log file name> |grep PID of bptm and see the actual error.
Thanks,
Giridhar
06-12-2012 10:36 AM
not a NetBackup problem. Fix the robot arm and/or tape drive hardware.
06-12-2012 12:03 PM
Yes...it does appear more of a robot issue. No free slots. Also, it looked like the robot was having problem reading the bar code on one of the tapes. We've removed the "bad" tape as well as removed a tape that was in the mail slot. Won't be able to test to later in the day. Will get back later to give status. Thanks to everyone for your input!
06-14-2012 09:51 AM
Everything is working fine now. Thank you again for everyone's input!
06-15-2012 01:37 AM
Tony - please Mark as Solution the answer that helped you the most to close the thread and assist others with similar issues in the future
Thanks