12-01-2008 03:11 AM
Hi, our scratch pool shows a lot of tapes which we on the other side cannot see on the Inventory robot ..?? !!
I learned the medias will taken by netbackup from scratch pool to netbackup pool when tapes are required.
It looks like that this does not work on our system, any ideas ?
12-01-2008 03:27 AM
Is your tapes on Scratch Pool - Controled By TLD or NONE ( Means Check ur Volumes Robot Type Attribute in Scratch Pool
12-01-2008 03:38 AM
@Manfred Ratzke wrote:Hi, our scratch pool shows a lot of tapes which we on the other side cannot see on the Inventory robot ..?? !!
If you're saying that they don't show up in Inventory of the robot then they aren't loaded in same. Have you loaded the tapes manually but not re-inventoried ('Update Volume Configuration')?
@Manfred Ratzke wrote:I learned the medias will taken by netbackup from scratch pool to netbackup pool when tapes are required.
It looks like that this does not work on our system, any ideas ?
If you are saying that they are in the robot but not been used when required then maybe your scratch pool isn't configured as a scratch pool (right-clickon scratch volume pool to confirm Scratch Pool box is ticked).
12-01-2008 04:10 AM
Tapes in scratch pool are set to robot type NONE,
aftyer running Inventory they are not listed...
12-01-2008 04:17 AM
Yes !!!
Robot Type NONE Means Tapes are not Robot control, i.e in Standalone
Mount the tapes and Re-Inventory the Robot
12-02-2008 11:18 PM
Hi,
when running 'robot Inventory', check the following option.
robot inventory > inventory operation >
--> update volume configuration
[v] empty media access port prior to update
And then, running Inventory.
I hope to see good results.