06-04-2014 02:51 AM
We have few tapes from a legacy netbackup environment and are trying to import the backup images of these tapes into new environment. For few tapes, 1st level of import shows successful and when I search/browse for images, can't see anything.
If I perform the following steps, will the 1st level impot be successful ?
a) bpexpdate -m mediaID -d 0 and
b) delete the tape from EMM database and
c) Run inventory of the library
d) perform a 1st level import again,
Solved! Go to Solution.
06-04-2014 03:11 AM
You need to do the next import phase2 before you'll see what was backed up.
http://www.symantec.com/docs/TECH43584
06-04-2014 03:11 AM
You need to do the next import phase2 before you'll see what was backed up.
http://www.symantec.com/docs/TECH43584
06-04-2014 03:17 AM
1st level import is showing as successful but I can't see the images for 2nd level import. Tried using GUI and CLI.
How can I Identify an image spans more than one media?
06-04-2014 03:22 AM
So you selected the media you imported and performed the search as in step 3?
And you don't get any results? Did you set the start date correctly?
Check the results tab (bottom of screen) of the catalog window and see if there is more details that might give you a clue.
06-04-2014 03:42 AM
How can I Identify an image spans more than one media?
You still have the environment where the tape(s) came from?
If so, check 'images on media' report on original master server.
Or 'tapes written' report for the period.
If you do not have access to original master, there is no way of knowing.
Do phase 1 import for all possible tapes, then start phase 2 import.
06-04-2014 04:22 AM
Import log is as follows.
Import phase 1 started Wed 04 Jun 2014 05:42:08 AM EDT
05:42:08 INF - Create DB information for media id xxxx.
05:42:08 INF - Initiation of bptm process to phase 1 import media id xxxx was successful.
05:42:19 INF - Waiting for mount of media id xxxx on server media_server for reading.
05:43:29 INF - Found existing image information for client my_client, policy my_policy, and schedule Full, done on 01/05/2014 12:37:10.
05:43:29 WRN - Cannot import client my_client, policy my_policy, and schedule Full, copy 2 fragment 2 already exists. Skipping this image.
05:44:24 INF - Creation of database information for import of media id xxxx complete.
I might have run this import for the 2nd time (I don't remember) but the tape is from another netbackup domain. I can't search for images. But I know that the tapes were used in 2008 so I gave starting year as 2000 while searching for catalog entries.
If I perform the following steps, will the 1st level impot be successful ?
a) bpexpdate -m mediaID -d 0 and
b) delete the tape from EMM database and
c) Run inventory of the library
d) perform a 1st level import again,
Note : I'm worried about running bpexpdate . So wanted to confirm before doing so. The tapes are write-protected.
06-04-2014 04:24 AM
@Marianne,
The old netbackup domain no longer exist now. But we have the tape inventory. I was able to perform import for most of the tapes. Only few tapes are giving the problem.
06-04-2014 04:33 AM
Import phase 1 started Wed 04 Jun 2014.....
You will not see images in BAR after phase 1.
You need to complete phase 2 as well.
Please read through Riaan's post again, and follow the steps in the TN.
06-04-2014 05:54 AM
I'm not trying in BAR. Uunder Catalog section, if I search for that media (slecting Import option), I can't find anything. To perform level 2 import, first I must see the one line entries of these images right ? Those one line entries (so called level 1 import) is showing as successful . But I can't browse or search for the images to perform level 2 import.
06-04-2014 06:07 AM
As per step 3 in the TN, check that all search criteria is correct.
Start date must go back far enough to include all possible images.
Also correct Media id, 'All Copies', 'All Clients', 'All Policies', 'All backup types'.
06-04-2014 06:22 AM
Yes Marianne. I did all the above before starting this thread.
I can see images when I run Tape contents Report. Phase 1 import also successful but can't run Phase 2 import (or find any images to perform Phase 2 import)