03-07-2012 02:03 PM
Hi,
On Solaris 10 I haven't been able to find out what to do with NB_CLT_7.1.0.3-tar-split.1of2 and 2of2.
I have gotten tar errors with both /usr/bin/tar and /usr/sfw/bin/gtar on each of the split files and after they have been concatenated.
What do I need to do with the CLT tar files before installing the Maintenance Release?
Thanks - Carl Mathews
University of Arkansas
Solved! Go to Solution.
03-08-2012 01:35 AM
Bear in mind that once you have joined them and are ready to un-tar them to follow the instructions in this tech note due to a know issue:
http://www.symantec.com/docs/TECH154080
Also, if this is a Master or Media Server you need the server installation and then extract that and the client one into the same directory and run the server installation
Hope this helps
03-07-2012 02:38 PM
The release instructions are at
http://www.symantec.com/business/support/index?page=content&id=TECH174231
The following are the Unix joining instructions fromthe above link, if that doesnt work I'd try downloading the files again :
cat "NB_CLT_7.1.0.3-tar-split.1of2" "NB_CLT_7.1.0.3-tar-split.2of2" > "NB_CLT_7.1.0.3.tar"
What error message do you get ?
03-08-2012 01:35 AM
Bear in mind that once you have joined them and are ready to un-tar them to follow the instructions in this tech note due to a know issue:
http://www.symantec.com/docs/TECH154080
Also, if this is a Master or Media Server you need the server installation and then extract that and the client one into the same directory and run the server installation
Hope this helps
03-08-2012 06:34 AM
Thanks for the links. I re-concatenated and gtar worked.