09-25-2012 12:39 PM
Hi guys
I'm getting problems with NBU 6.5, because some job showing status code:52. and I can't complete the backup job.
09-25-2012 12:48 PM
52 - media mount timeout.
What are the robot and drive models?
Have you tried deleting and re-adding the drives?
Check these technotes:
http://www.symantec.com/business/support/index?page=content&id=TECH29145
http://www.symantec.com/business/support/index?page=content&id=HOWTO34938
http://www.symantec.com/business/support/index?page=content&id=TECH31854
09-25-2012 12:50 PM
Is a StorageTeck, but I don't have the model
09-25-2012 12:56 PM
Have you checked the technotes and even tried deleting and re-adding the drives? I would.
Also NetBackup 6.x is out of support from October 3rd!!!
09-25-2012 01:09 PM
09-27-2012 09:01 PM
I agree with delete and re-add, but please verify that Persistent Binding is done at hba level before you do so.
Incorrect device mappings is known for causing status 52. Persistent Binding will keep device mappings the same across reboots.