Sorry guys, I posted but can't see a word myself too... also cannot edit my first post. could anyone tell me about that? i hope i can have important information in the first post...
Whatever, here is the situation:
1.all 4 servers and library are connected by 2 Brocade silkworm 3850.
2.dg-file-server is master server.
3.commandline runs:
C:\Program Files\VERITAS\Volmgr\bin>vmoprcmd
HOST STATUS
Host Name Version Host Status
========================================= ======= ===========
dg-file-server 600000 ACTIVE
twm0331070- 600000 ACTIVE
db1-data-bbc 600000 ACTIVE
db2-data-bbc 600000 ACTIVE
PENDING REQUESTS
<NONE>
DRIVE STATUS
Drive Name Label Ready RecMID ExtMID Wr.Enbl. Type
Host DrivePath Status
============================================================================
HP.ULTRIUM2-SCSI.000 No No No hcart2
dg-file-server MISSING_DRIVE:HUL5J06757 DOWN
twm0331070- {4,1,2,1} DOWN
db1-data-bbc /dev/rmt/1cbn AVR
db2-data-bbc /dev/rmt/1cbn AVR
HP.ULTRIUM2-SCSI.001 No No No hcart2
dg-file-server MISSING_DRIVE:HUL5H03346 DOWN
twm0331070- {4,1,2,2} DOWN
db1-data-bbc /dev/rmt/0cbn DOWN
db2-data-bbc /dev/rmt/0cbn DOWN
C:\Program Files\VERITAS\Volmgr\bin>tpconfig -d
Id DriveName Type Residence
SCSI coordinates/Path Statu
****************************************************************************
0 HP.ULTRIUM2-SCSI.000 hcart2 TLD(0) DRIVE=1
MISSING_DRIVE:HUL5J06757 DOWN
1 HP.ULTRIUM2-SCSI.001 hcart2 TLD(0) DRIVE=2
MISSING_DRIVE:HUL5H03346 DOWN
Currently defined robotics are:
TLD(0) SCSI coordinates = {6,0,0,0},
EMM Server = dg-file-server
C:\Program Files\VERITAS\Volmgr\bin>tpautoconf -t
TPAC60 HP Ultrium 2-SCSI F59W HUL5H03346 6 0 0 0 Tape0 - -
C:\Program Files\VERITAS\Volmgr\bin>
4.i found that there is a red light blinking on the HBA card of master server. all the others are only green light on steadily. what does this mean? A bad cable or a bad card? or even bad port of the switch?