cancel
Showing results for 
Search instead for 
Did you mean: 

Veritas Netbackup not working

nike4ever
Level 2
Hi,

I encounter some problem while trying to setup the Veritas netbackup administration console 6.5. It shows "The host is not defined in EMM". Then I saw that the ltid deamon is not started and here's the following log. 

09:40:19.058 [1078] <4> ltid: INITIATING 09:40:19.059 [1078] <2> mm_getnodename: cached_hostname kenanga, cached_method 3 09:40:19.078 [1078] <2> mm_getnodename: (4) hostname kenanga-mgt ( from mm_check_required_interface) 09:40:19.078 [1078] <4> ltid: auto_correct_paths set to 0 09:40:21.105 [1078] <4> InitLtidEMM: emmserver_name = kenanga-mgt 09:40:21.105 [1078] <4> InitLtidEMM: emmserver_port = 1556 09:40:21.105 [1078] <4> InitLtidEMM: ThisHost = kenanga-mgt 09:40:21.124 [1078] <2> Orb::init: initializing ORB Default_CLIENT_Orb with: ltid -ORBSvcConfDirective "-ORBDottedDecimalAddresses 0" -ORBSvcConfDirective "static PBXIOP_Factory ''" -ORBSvcConfDirective "static EndpointSelectorFactory ''" -ORBSvcConfDirective "static Resource_Factory '-ORBProtocolFactory PBXIOP_Factory'" -ORBSvcConfDirective "static Resource_Factory '-ORBProtocolFactory IIOP_Factory'" -ORBSvcConfDirective "static PBXIOP_Evaluator_Factory '-orb Default_CLIENT_Orb'" -ORBSvcConfDirective "static Resource_Factory '-ORBConnectionCacheMax 1024 '" -ORBSvcConf /dev/null(Orb.cpp:691) 09:40:21.206 [1078] <4> InitLtidEMM: connected to EMM server 09:40:21.206 [1078] <2> mm_getnodename: (0) hostname kenanga-mgt (from cached_hostname) 09:40:21.220 [1078] <4> InitLtidEMM: Device Mappings version in EMM database is 1.66 09:40:21.220 [1078] <4> InitLtidEMM: Local device mapping is up-to-date 09:40:21.246 [1078] <4> InitLtidEMM: Releasing media server allocations 09:40:21.247 [1078] <2> Orb::init: initializing ORB Default_CLIENT_Orb with: Unknown -ORBSvcConfDirective "-ORBDottedDecimalAddresses 0" -ORBSvcConfDirective "static PBXIOP_Factory ''" -ORBSvcConfDirective "static EndpointSelectorFactory ''" -ORBSvcConfDirective "static Resource_Factory '-ORBProtocolFactory PBXIOP_Factory'" -ORBSvcConfDirective "static Resource_Factory '-ORBProtocolFactory IIOP_Factory'" -ORBSvcConfDirective "static PBXIOP_Evaluator_Factory '-orb Default_CLIENT_Orb'" -ORBSvcConfDirective "static Resource_Factory '-ORBConnectionCacheMax 1024 '" -ORBSvcConf /dev/null(Orb.cpp:691) 09:40:21.279 [1078] <4> InitLtidDeviceInfo: RobotCount = 0 09:40:21.279 [1078] <4> InitLtidDeviceInfo: DriveCount = 0 09:40:21.280 [1078] <6> logstderrmsg: No Entries in the Drive Database 09:40:21.280 [1078] <16> TermLtid: Shutting down ltid, ToAnswer = no

This is the /usr/openv/netbackup/bp.conf file

SERVER = kenanga-mgt
CLIENT_NAME = kenanga
EMMSERVER = kenanga-mgt
VXDBMS_NB_DATA = /usr/openv/db/data
REQUIRED_INTERFACE=kenanga-mgt

the hostname is kenanga

Any suggestions?
1 ACCEPTED SOLUTION

Accepted Solutions

Anton_Panyushki
Level 6
Certified
No, you should add your management workstation to the SERVER list in master's bp.conf.
It should look as follows:

SERVER = mgmt-hostname

Please don't forget to make NetBackup to reread bp.conf by issueing bprdreq -rereadconfig.

View solution in original post

6 REPLIES 6

cviniciusm
Level 4
Hello,

On kenanga-mgt, include kenanga on servers list.


Regards.

nike4ever
Level 2
 where do i add this? is it a file?


here's the /etc/hosts file too.


#
# Internet host table
#
::1     localhost
#
#
### M5000 Domain 1 Production IP ###
127.0.0.1       localhost
10.0.1.96       kenanga kenanga.tafis.mof.gov.bn loghost
10.0.1.97       simpur  simpur.tafis.mof.gov.bn
10.0.128.11     kenangaprod kenangaprod.tafis.mof.gov.bn
10.0.128.14     simpurprod simpurprod.tafis.gov.bn
10.1.10.250     lawang
#
#
### M5000 Domain 1 Management IP ###
100.100.100.3   kenanga-mgt     kenanga-mgt.tafis.mof.gov.bn
100.100.100.2   simpur-mgt      simpur-mgt.tafis.mof.gov.bn
100.100.100.1   kemboja
 

Anton_Panyushki
Level 6
Certified
No, you should add your management workstation to the SERVER list in master's bp.conf.
It should look as follows:

SERVER = mgmt-hostname

Please don't forget to make NetBackup to reread bp.conf by issueing bprdreq -rereadconfig.

nike4ever
Level 2
 screenshot.JPG

I'm still getting the same error. 

nike4ever
Level 2
i've updated the bp.conf, stop and start netbackup. At the kenanga (6.5 Enterprise Server_ Netbackup Administration Console, I've tried to run the Getting Started. When it reach the Scanning Hosts, it ask me to exit the wizard. So i click yes. Warning message "The host is not defined in EMM Invalid host" and "server name not found in NetBackup configuration (status 254)".




09:22:40.486 [25337] <4> ltid: INITIATING
09:22:40.487 [25337] <2> mm_getnodename: cached_hostname kenanga, cached_method 3
09:22:40.492 [25337] <2> mm_getnodename:  (4) hostname kenanga-mgt ( from mm_check_required_interface)
09:22:40.492 [25337] <4> ltid: auto_correct_paths set to 0
09:22:42.514 [25337] <4> InitLtidEMM: emmserver_name = kenanga-mgt
09:22:42.514 [25337] <4> InitLtidEMM: emmserver_port = 1556
09:22:42.514 [25337] <4> InitLtidEMM: ThisHost = kenanga-mgt
09:22:42.526 [25337] <2> Orb::init: initializing ORB Default_CLIENT_Orb with: ltid -ORBSvcConfDirective "-ORBDottedDecimalAddresses 0" -ORBSvcConfDirective "static PBXIOP_Factory ''" -ORBSvcConfDirective "static EndpointSelectorFactory ''" -ORBSvcConfDirective "static Resource_Factory '-ORBProtocolFactory PBXIOP_Factory'" -ORBSvcConfDirective "static Resource_Factory '-ORBProtocolFactory IIOP_Factory'" -ORBSvcConfDirective "static PBXIOP_Evaluator_Factory '-orb Default_CLIENT_Orb'" -ORBSvcConfDirective "static Resource_Factory '-ORBConnectionCacheMax 1024 '" -ORBSvcConf /dev/null(Orb.cpp:691)
09:22:42.648 [25337] <4> InitLtidEMM: connected to EMM server
09:22:42.648 [25337] <2> mm_getnodename: (0) hostname kenanga-mgt (from cached_hostname)
09:22:42.674 [25337] <4> InitLtidEMM: Device Mappings version in EMM database is 1.66
09:22:42.676 [25337] <4> InitLtidEMM: Local device mapping is up-to-date
09:22:42.705 [25337] <4> InitLtidEMM: Releasing media server allocations
09:22:42.707 [25337] <2> Orb::init: initializing ORB Default_CLIENT_Orb with: Unknown -ORBSvcConfDirective "-ORBDottedDecimalAddresses 0" -ORBSvcConfDirective "static PBXIOP_Factory ''" -ORBSvcConfDirective "static EndpointSelectorFactory ''" -ORBSvcConfDirective "static Resource_Factory '-ORBProtocolFactory PBXIOP_Factory'" -ORBSvcConfDirective "static Resource_Factory '-ORBProtocolFactory IIOP_Factory'" -ORBSvcConfDirective "static PBXIOP_Evaluator_Factory '-orb Default_CLIENT_Orb'" -ORBSvcConfDirective "static Resource_Factory '-ORBConnectionCacheMax 1024 '" -ORBSvcConf /dev/null(Orb.cpp:691)
09:22:42.795 [25337] <4> InitLtidDeviceInfo: RobotCount = 0
09:22:42.795 [25337] <4> InitLtidDeviceInfo: DriveCount = 0
09:22:42.795 [25337] <6> logstderrmsg:
No Entries in the Drive Database
09:22:42.795 [25337] <16> TermLtid: Shutting down ltid, ToAnswer = no
 

Marianne
Level 6
Partner    VIP    Accredited Certified
You have marked the post as being SOLVED??
Please share more info about your installation.
Are you trying to configure NetBackup with the second interface name?
Which name did you specify during installation?

"The host is not defined in EMM"
Please post output of 'nbemmcmd -listhosts'