11-15-2008 11:39 PM
Hi,
I am facing a problem during the installation of veritas netbackup, where after installing the netbackup on the solaris 10 system (Sun V245), when I do sg.install, I am getting the following error message
# ./sg.install
Copied files to /kernel/drv to /kernel/drv/sparcv9.
Doing add_drv of the sg driver
devfsadm: driver failed to attach: sg
Warning: Driver (sg) successfully added to system but failed to attachn
WARNING: /usr/sbin/add_drv failed.
There may be no SCSI devices on this machine
Please find the cfgadm -a output below
root@bkp-server # cfgadm -a
c3 scsi-bus connected configured unknown
c3::rmt/1 tape connected configured unknown
c3::scsi/changer/c3t5d1 med-changer connected configured unkno
Eventhough my library (C2 tape autoloader -SCSI) is detected in the os , it does not show in veritas
When I do #modinfo | grep sg
it returns with sgen (solaris sgen, not veritas sg)
#modload /kernel/drv/sparcv9/sg
sg: WARNING: sg: _init failed on linkage 6
#/usr/openv/volmgr/bin/sgscan all
# (Returns nothing)
#/usr/openv/volmgr/bin/scan
(returns no devices)
through the netbackup graphical console also it is not able to find the devices
Please advise me on the above issue
Thanks and Regards
Ushas Symon
Solved! Go to Solution.
11-16-2008 07:08 PM
11-16-2008 07:08 PM