alert tape codes

[T_N]

Hi All,

Anyone see tape alert codes ? I have 12 LTO tape drives, they're shared by 4 servers (master & media servers) when I run backup, I get tape alert codes on one of media servers.

here backup job log:

05/14/2009 08:15:44 - requesting resource LCM_gsu_servers_drv
05/14/2009 08:15:45 - begin Duplicate
05/14/2009 08:15:45 - granted resource LCM_gsu_servers_drv
05/14/2009 08:15:45 - started process RUNCMD (pid=18032)
05/14/2009 08:15:46 - requesting resource gsu_servers_drv
05/14/2009 08:15:46 - requesting resource @aaaaI
05/14/2009 08:15:46 - reserving resource @aaaaI
05/14/2009 08:15:48 - Waiting for scan drive stop drive_0_0_0_1, Media server: gsumedia02.gsuprv
05/14/2009 08:16:21 - started process bptm (pid=26867)
05/14/2009 08:16:18 - resource @aaaaI reserved
05/14/2009 08:16:18 - granted resource ST0015
05/14/2009 08:16:18 - granted resource drive_0_0_0_1
05/14/2009 08:16:18 - granted resource gsumedia02_drv
05/14/2009 08:16:18 - granted resource MediaID=@aaaaI;DiskVolume=/nbu/01;DiskPool=gsumedia02_disk01;Path=/nbu/01;StorageServer=gsumedia02.gsuprv;MediaServer=gsumedia02.gsuprv
05/14/2009 08:16:25 - started process bpdm (pid=26873)
05/14/2009 08:16:27 - started process bptm (pid=26867)
05/14/2009 08:16:27 - mounting ST0015
05/14/2009 08:16:28 - begin reading
05/14/2009 08:17:22 - Warning bptm (pid=26867) TapeAlert Code: 0x03, Type: Warning, Flag: HARD ERROR, from drive drive_0_0_0_1 (index 1), Media Id ST0015
05/14/2009 08:17:22 - Error bptm (pid=26867) TapeAlert Code: 0x04, Type: Critical, Flag: MEDIA, from drive drive_0_0_0_1 (index 1), Media Id ST0015
05/14/2009 08:17:22 - Error bptm (pid=26867) TapeAlert Code: 0x06, Type: Critical, Flag: WRITE FAILURE, from drive drive_0_0_0_1 (index 1), Media Id ST0015
05/14/2009 08:17:23 - Warning bptm (pid=26867) TapeAlert Code: 0x0f, Type: Warning, Flag: MIC FAILURE, from drive drive_0_0_0_1 (index 1), Media Id ST0015
05/14/2009 08:17:23 - Warning bptm (pid=26867) TapeAlert Code: 0x11, Type: Warning, Flag: READ ONLY, from drive drive_0_0_0_1 (index 1), Media Id ST0015
05/14/2009 08:17:25 - end reading; read time: 0:00:57
05/14/2009 08:17:26 - end Duplicate; elapsed time 0:01:41
the requested operation was successfully completed (0)


Also anyone know why I have  "SCAN-ACS"


gsunbmaster:/ # vmoprcmd

HOST STATUS
Host Name Version Host Status
========================================= ======= ===========
gsunbmaster.gsuprv 653000 ACTIVE
gsumedia01.gsuprv 653000 OFFLINE
gsumedia02.gsuprv 653000 ACTIVE
gsumedia04.gsuprv 653000 ACTIVE
gsumedia03.gsuprv 653000 ACTIVE

PENDING REQUESTS


<NONE>

DRIVE STATUS

Drive Name Label Ready RecMID ExtMID Wr.Enbl. Type
Host DrivePath Status
=============================================================================
drive_0_0_0_0 No No No hcart
gsunbmaster.gsuprv /dev/rmt/0cbn SCAN-ACS
gsumedia02.gsuprv /dev/rmt/0cbn ACS
gsumedia04.gsuprv /dev/rmt/0cbn ACS
gsumedia03.gsuprv /dev/rmt/0cbn ACS

drive_0_0_0_1 No No No hcart
gsunbmaster.gsuprv /dev/rmt/1cbn SCAN-ACS
gsumedia02.gsuprv /dev/rmt/1cbn ACS
gsumedia04.gsuprv /dev/rmt/1cbn ACS
gsumedia03.gsuprv /dev/rmt/1cbn ACS

drive_0_0_0_10 No No No hcart
gsunbmaster.gsuprv /dev/rmt/10cbn SCAN-ACS
gsumedia02.gsuprv /dev/rmt/10cbn ACS
gsumedia04.gsuprv /dev/rmt/10cbn ACS
gsumedia03.gsuprv /dev/rmt/10cbn ACS

drive_0_0_0_11 No No No hcart
gsunbmaster.gsuprv /dev/rmt/11cbn SCAN-ACS
gsumedia02.gsuprv /dev/rmt/11cbn ACS
gsumedia04.gsuprv /dev/rmt/11cbn ACS
gsumedia03.gsuprv /dev/rmt/11cbn ACS

drive_0_0_0_2 No No No hcart
gsunbmaster.gsuprv /dev/rmt/2cbn SCAN-ACS
gsumedia02.gsuprv /dev/rmt/2cbn ACS
gsumedia04.gsuprv /dev/rmt/2cbn ACS
gsumedia03.gsuprv /dev/rmt/2cbn ACS

drive_0_0_0_3 No No No hcart
gsunbmaster.gsuprv /dev/rmt/3cbn SCAN-ACS
gsumedia02.gsuprv /dev/rmt/3cbn ACS
gsumedia04.gsuprv /dev/rmt/3cbn ACS
gsumedia03.gsuprv /dev/rmt/3cbn ACS

drive_0_0_0_4 No No No hcart
gsunbmaster.gsuprv /dev/rmt/4cbn SCAN-ACS
gsumedia02.gsuprv /dev/rmt/4cbn ACS
gsumedia04.gsuprv /dev/rmt/4cbn ACS
gsumedia03.gsuprv /dev/rmt/4cbn ACS

drive_0_0_0_5 No No No hcart
gsunbmaster.gsuprv /dev/rmt/5cbn SCAN-ACS
gsumedia02.gsuprv /dev/rmt/5cbn ACS
gsumedia04.gsuprv /dev/rmt/5cbn ACS
gsumedia03.gsuprv /dev/rmt/5cbn ACS

drive_0_0_0_6 No No No hcart
gsunbmaster.gsuprv /dev/rmt/6cbn SCAN-ACS
gsumedia02.gsuprv /dev/rmt/6cbn ACS
gsumedia04.gsuprv /dev/rmt/6cbn ACS
gsumedia03.gsuprv /dev/rmt/6cbn ACS

drive_0_0_0_7 No No No hcart
gsunbmaster.gsuprv /dev/rmt/7cbn SCAN-ACS
gsumedia02.gsuprv /dev/rmt/7cbn ACS
gsumedia04.gsuprv /dev/rmt/7cbn ACS
gsumedia03.gsuprv /dev/rmt/7cbn ACS

drive_0_0_0_8 No No No hcart
gsunbmaster.gsuprv /dev/rmt/8cbn SCAN-ACS
gsumedia02.gsuprv /dev/rmt/8cbn ACS
gsumedia04.gsuprv /dev/rmt/8cbn ACS
gsumedia03.gsuprv /dev/rmt/8cbn ACS

drive_0_0_0_9 No No No hcart
gsunbmaster.gsuprv /dev/rmt/9cbn SCAN-ACS
gsumedia02.gsuprv /dev/rmt/9cbn ACS
gsumedia04.gsuprv /dev/rmt/9cbn ACS
gsumedia03.gsuprv /dev/rmt/9cbn ACS

[scorpy_582]

Below is the link to listing of all tape alert codes:

http://www.t10.org/ftp/t10/document.02/02-142r0.pdf  


For the second question:

SCAN-ACS means that particular media server is designated as "scan host"

[T_N]

For the second question:

SCAN-ACS means that particular media server is designated as "scan host"


Is is normal? I never see it before, the media server is designated as "SCAN-HOST" is master server

[scorpy_582]

Yes, it is very common to see a scan-host in an SSO environment. 

[netbackup_rooki]

here is technote..this also has the same link scorpy_582 provided.

http://seer.entsupport.symantec.com/docs/284473.htm

[netbackup_rooki]

here is technote..this also has the same link scorpy_582 provided.

http://seer.entsupport.symantec.com/docs/284473.htm

[netbackup_rooki]

here is technote..this also has the same link scorpy_582 provided.

http://seer.entsupport.symantec.com/docs/284473.htm

[netbackup_rooki]

here is technote..this also has the same link scorpy_582 provided.

http://seer.entsupport.symantec.com/docs/284473.htm

[netbackup_rooki]

I applogize for my system adding so many of the same enteries.