06-05-2019 02:57 PM
Hi All,
I'm using VEA to administrer a Veritas SFHA 6.2 system (LINUX, two node system), and in VEA when I look at the disks on node1, it shows the expected names e.g.: "sdx" "sdy" "sdy".
On node2, I see the enclosure names e.g.: emc_xxxx
I did run vxdmpadm getsubpaths, and they show exactly the same results set on both nodes.
Is there a way I can change those disks names so that it shows the "sd.." name instead of the enclosure ones?
thanks!
Solved! Go to Solution.
06-13-2019 05:06 AM
try this on the node that you want to change the disk names from enclosure based to std format
run this command
#vxddladm set namingscheme=osn
then
#vxdisk list
06-13-2019 05:06 AM
try this on the node that you want to change the disk names from enclosure based to std format
run this command
#vxddladm set namingscheme=osn
then
#vxdisk list