Hi!
I build a V220R with Sol10 Sparc + 10 Recommended.
As it has a single disk installed,
on other Ubuntu machine, and using iscsitarget-0.4.16,
I exported 3 SATA disks.
After seting some things up, I have echo|format with the local and iSCSI disks
I labeled them and play with the for a while.
After that I installed Q18985F.sfbasic.dvd2.5.0.00.0.sol.tar.gz
To my surprise after booting the machine form the c0t0d0s0 disk,
I get errors from all the veritas setup tools.
And I see tha vxconfigd is not running
Invoking it with
#vxconfigd -k
leaves a core and the message "BUS ERROR".
On the target side I see on the log:
root@albricias:/home/seba# tail -f /var/log/syslog
Apr 18 15:37:47 albricias kernel: [63440.288320] iscsi_trgt: cmnd_skip_pdu(454) 8a 1c 0 0
Apr 18 15:37:47 albricias kernel: [63440.289092] iscsi_trgt: scsi_cmnd_start(920) 8c 0
Apr 18 15:37:47 albricias kernel: [63440.289098] iscsi_trgt: cmnd_skip_pdu(454) 8c 1c 0 0
Apr 18 15:37:47 albricias kernel: [63440.290332] iscsi_trgt: scsi_cmnd_start(920) 8c 0
Apr 18 15:37:47 albricias kernel: [63440.290338] iscsi_trgt: cmnd_skip_pdu(454) 8c 1c 0 0
Apr 18 15:37:47 albricias kernel: [63440.290900] iscsi_trgt: scsi_cmnd_start(920) 8e 0
Apr 18 15:37:47 albricias kernel: [63440.290906] iscsi_trgt: cmnd_skip_pdu(454) 8e 1c 0 0
[....]
Is there anything I can do to fix this? Or this is an totally unsupported configuration?
I can not access the V220 right now, but in case somebody wants to help, I can run commands an post them here.
Regards,
Sebastián
