Hi,
I am new to solaris. I installed solaris volume manager and created metadevices. Except one metadevice all are showing "Device" info in CTD format but the one is shown in "/dev/dsk/CTD" format. In what scenarios does this happen? is it expected behaviour? if so is there any way i can list out all metadevice "Device"s in one format? Below I have attached metastat output format. In the d42 is shows as CTD and d1023 is shown in "/dev/dsk/CTD" format.
-----------------------------------------------------------
d42: Submirror of d40
State: Needs maintenance
Invoke: metasync d40
Size: 10247232 blocks (4.9 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t1d0s4 0 No Okay Yes
d1023: Concat/Stripe
Size: 113798880 blocks (54 GB)
Stripe 0: (interlace: 2048 blocks)
Device Start Block DbaseReloc
/dev/dsk/c6t50060E8003F64A19d5s7 0 No Yes
/dev/dsk/c6t50060E8003F64A19d6s7 1440 No Yes
---------------------------------------------------------------------
And what does "Device Relocation Information:" stands for?
Regards,
Shivaraj
