05-13-2011 03:20 AM
Hi
we have set up SBS system recovery 2010 on a server and have configured to NAS drives one onsite and one office. The offiste needs to be taken home at the end of the day and then connected back the next day so that the backup can transfer however this is not happening, I would like to know if there is any way to have System recovey 2010 to detect when the offsite NAS drive becomes available and copy over the data when it is. At the moment i have had no luck, i spoke to symantec a few months ago and they said it can't be done, i would like to know if any fixes has been releasd to fix this issue.
Thanks
Dhiraj
Solved! Go to Solution.
05-13-2011 03:34 AM
This sounds very much like a known issue we have. We currently have an 'orphan' (pre-release fix) or you can wait for SP3 for BESR 2010 which includes this fix. SP3 is a few weeks away before it is released.
Hope that helps.
05-13-2011 03:34 AM
This sounds very much like a known issue we have. We currently have an 'orphan' (pre-release fix) or you can wait for SP3 for BESR 2010 which includes this fix. SP3 is a few weeks away before it is released.
Hope that helps.
05-13-2011 03:49 AM
Hi Chris
Thanks for the quick reply can you send me a link where i can download the pre-release fix
Thanks
Dhiraj
05-13-2011 03:55 AM
The pre-release fix can only be obtained via a support case. Do you have a support contract?
05-13-2011 04:02 AM
Hi Chris
Yes we do we.
Thanks
Dhiraj
05-13-2011 04:21 AM
Hi Chris
Do we have to open a case via phone or can we do this online
Thanks
Dhiraj
05-13-2011 04:35 AM
Either way:
Online: http://www.symantec.com/business/support/index?page=selectCategory
Phone: http://www.symantec.com/business/support/contact_techsupp_static.jsp