About John_Gathright

John_Gathright · 09-16-2005

I'm running Backup Exec v9.1 on a W2K Professional server equipped with a Certance CL400H Ultrium LTO-2 tape drive. The drive is recognized by the Veritas software and backups are for the most part running smoothly. However, when I right-click on ...

John_Gathright · 09-14-2005

I'm running Backup Exec v9.1 on a Windows 2000 server interfacing to a Certance CL400H halfheight LTO-2 tape drive on a dedicated SCSI (Adaptec 29160). For several months after installing the Certance drive my backups ran with no problems then, just...

John_Gathright · 04-13-2005

I'm running Veritas Backup Exec 9.1, rev. 4691 on a Windows 2000 Professional machine. The tape backup is a Sony TSL-9000 robotics library. The driver is one I obtained from the Veritas drivers page, is version 5.0 and dated 9/2/2003. When I first...

John_Gathright · 09-22-2005

I've also tried installing the most recent Certance drivers but the media type is still 'misbehaving.'Thx...

John_Gathright · 09-21-2005

I've found a combination of drivers that seems to have stabilzed the backup jobs. Thx...

John_Gathright · 09-19-2005

FYI...Yes, the device is listed and supported in BE9.1, and, yes, the most recent Veritas drivers are being used to support the Certance tape drive. As far as I know, the Certance CL400H tape drive does NOT support bar codes, and they are not enable...

John_Gathright · 09-14-2005

NigelI posted a very similar problem on the forum site today as well. I was able to get around the problem (sort of) by reinstalling both the drivers for my SCSI controller (Adaptec 29160) and for my tape drive (Veritas drivers for a Certance LTO-2)...

John_Gathright · 04-15-2005

FYI...Thanks for the info. I did update the drivers package from the link you provided. I also yesterday re-cabled the SCSI chain internally, so now only time will tell. My problems always occur during backups to the TSL-9000, and then only during...

VOX

User Statistics

User Activity

Backup Exec Media Types 'missing'

Backup Exec job runs for a time then 'freezes' and job stays queued

Robotic library hardware error

Re: Backup Exec Media Types 'missing'

Re: Backup Exec job runs for a time then 'freezes' and job stays queued

Re: Backup Exec Media Types 'missing'

Re: Job runs for a while then stops and stays Queued

Re: Robotic library hardware error