09-17-2013 01:31 AM
Hi All,
I am using HP LTO-3 Ultrium 800 as my backup media. Under storage, the media storage capacity is 391GB and compression ratio is 1.0:1
How do i make it 2.0:1 for ratio?
FYI: I enabled compression and encrpytion for my backup job and now it reported no enough space.. my last backup byte count was 468GB.
Please help
Solved! Go to Solution.
09-17-2013 09:26 AM
09-17-2013 01:51 AM
this backup was working well before i enable encryption. I created encryption key as 256-bit AES under BE 2012
Previously successfully job only got compression enabled "Hardware if available otherwise none"
will this a cause to my job failure?
09-17-2013 02:02 AM
Hi,
It's highly doubtful you will ever get 2:1 compression unless you're only backing up text files. Different file types compress differently. However, enabling compression will ensure that the levels of comression you got before, won't happen again due to the overhead placed on the files while encrypting them.
You can ensure that Hardware encryption is used, as this uses the capabilities of the drive, and not the resources of the server using Software encryption.
Thanks!
EDIT: check below for more information:
http://www.symantec.com/business/support/index?page=content&id=HOWTO21799
09-17-2013 02:16 AM
Yup i enabled hardware encrpytion under backup job - storage and uses 256 bit encryption key.
Before this option enable, all my job run well. Now it said media full,insert another media.
Any idea why?
09-17-2013 02:21 AM
LTO3 is capable of 400GB native, and 800GB compressed capacity, assuming 2:1 which isn't possible in real-world scenarios.
You're getting that alert as you are getting no compression, hence you're only hitting the native capacity of the tape, namely 400GB. You either need to live with this and use multiple tapes, but have encryption, or turn off encryption and go back to fitting everything onto 1 tape again.
Thanks!
09-17-2013 07:40 AM
Hi,
It is not recommended by Backup exec to have both Encryption and Compression option enabled together. When you enable encryption then compression does not happen. So in order to enable compression on tape please turn off encryption.
Thanks
09-17-2013 09:15 AM
09-17-2013 09:26 AM
09-17-2013 07:13 PM
Hi PKH,
I tried your method to use both software on compression & encryption. However, the compression ratio under storage tab still show 1.0:1.
i got a few backup media LTO3 ,some shown as 1.9:1 as ratio.
Any idea?
09-17-2013 09:54 PM
This is correct because the data are already compressed when it is sent to the tape drive. To see what the compression ratio is, take a look at the job log or divide the amount of data on the by the amount of data at the source.
Suppose you have 2GB of data on your source disk. If you use hardware compression and the final result is that 1GB of data is written to the tape, then your compression ratio is 2:1. If you use software compression, the 2GB data is compressed to 1GB before it is sent to the tape, hence you get a 1:1 compression ratio.
09-17-2013 11:14 PM
Hi Pkh,
I did check the backup log. The byte count is the same with the backup source file even software compression is enabled.
i did use tracer.exe ..seem like no compression.
any idea?
09-17-2013 11:26 PM
...do you have some sort of documentation around this?
Thanks!
09-17-2013 11:31 PM
If you use software compression and you still don't get any compression, it means that your data is not compressible. For example, you have zipped or movie files, sound clips or picture in your source. See my article below on the subject.
https://www-secure.symantec.com/connect/articles/compression-short-explanation
To test your compression, create a test directory and fill it with text files. Back this up both with software and hardware compression and you will see good compression ratios. You can even throw in encryption in your test.
09-18-2013 01:25 AM
Thanks pkh for the great article. Now i'm fully understood.
BTW do you have article on LTO 4 and above?
I am running a test job. Hopefully it will work..update u again
09-18-2013 01:29 AM
do you have article on LTO 4 and above?
What information are you looking for?
09-18-2013 06:25 AM
Hi,
Here is a document supporting what I stated earlier.
http://www.symantec.com/docs/TECH135848
Thanks
09-18-2013 06:31 AM
Well, strictly what you said is untrue. The TN above doesn't recommend not using compression and encryption together. It simply states that files can be 5% bigger.
The Related Article states that hardware compression shouldn't be used. Instead use software encryption. So there is nothing in either of them stating that Symantec doesn't recommend using compression and encryption together, as per 1 of your previous posts.
Thanks!
09-18-2013 06:17 PM
i recreated a job, enable both software compression and encryption and my job successfully.
thanks everyone for your advice/suggestions.