05-01-2012 11:29 AM
I have a new EMC VNX5300 san box which we are going to connect to another san box Celerra NS4800 directly.
We have spectralogic T120 tape library connected to Celerra NS4800 .So i would like to know the process to take backup using disk to disk to tape(i.e copy data from VNX5300 to NS4800 then copy it to tapedrive using backup exec).We have also purchased NDMP license along with backup exec 2010.Also suggest if we need to use a media server to install the NDMP agent for SAN backup.
05-01-2012 11:41 AM
Try this KB - http://www.symantec.com/business/support/index?page=content&id=TECH48957 ....specifically the section about 3-way backup
Also, do check the BE 2010's hardware compatibility list - http://www.symantec.com/business/support/index?page=content&id=TECH137050&key=15047&basecat=COMPATIBILITY_LIST&actp=LIST
05-01-2012 12:21 PM
Thanks for your quick reply however the link provided is not working.I have checked the hardware they are all compatible with backup exec 2010.please provide the steps manually if the link is not working.
05-01-2012 12:25 PM
Pls try this link - http://www.symantec.com/business/support/index?page=content&id=TECH49622
If it re-routes back to the Support's home page, simply paste TECH49622 in the search bar..
05-01-2012 01:04 PM
The document looks good however i haven't got a clear idea of d-d-t backup it just has ndmp config.can you give a detailed document.
05-29-2012 10:22 AM
can anyone give any more solutions to this question?
05-29-2012 10:36 AM
this is what we would call a Filer-to-Filer or a 3-way backup...verbatim from KB - TECH48957
In the filer-to-filer model, often referred to as three-way, the backup server uses NDMP over the LAN to instruct filer A to start backing up data to tape devices attached to filer B via either the same network or a private backup network. During the backup, information about files and directories written to tape is transferred from filer A via NDMP over the LAN to the backup server, where it is maintained in an index.
install the NDMP license...
add VNX5300 from the NDMP node or as an user-defined selection...
add the tape drive attached to NS4800 as a storage device in BE...
05-29-2012 02:06 PM
Technically 3 Way NDMP means the traffic passes from one NDMP device through another before being written to storage (tape). It does not mean backup up from one NDMP location to storage(disk) on another NDMP location and then copying to tape (D2D2T)
If you want to do D2D2T with BE where the data is held on an NDMP device, then you use a B2D (or possibly DeDup store) on the media server itself as the first backup target and then use a tape library attached to the media server as the duplicate target - which I suspect may not be what you want.
05-29-2012 05:58 PM
The Spectralogic T120 is a multidrive library. Why wouldn't you just zone some drives for the new VNX and NDMP directly to it? And you have a different set of drives that may have to still backup the Celerra.
Thats the best use of a SAN...