04-10-2007 01:07 PM
04-10-2007 01:27 PM
Suggestion 1:
Perform the following registry change to allow Backup Exec to use the devices:Warning: Incorrect use of the Windows Registry Editor can have disastrous results on a server operating system. Great care should be taken when making changes to a Windows Registry. Registry modifications should only be carried out by persons experienced in the use of the Registry Editor application.1. Click Start | Run2. In the Run window, next to Open:, type regedt323. In the Registry Editor window, double-click HKEY_LOCAL_MACHINE4. Under HKEY_LOCAL_MACHINE, double-click SOFTWARE 5. Under SOFTWARE, double-click VERITAS6. Under VERITAS, double-click Backup Exec7. Under Backup Exec, click to select Server 8. In the right pane, double-click the LoadBalancerBehavior registry keyNote: If the LoadBalancerBehavior key is not present, right-click in the right pane and select New. In the New menu, click to select DWORD Value. Type the name of the new DWORD as LoadBalancerBehavior.9. In the Edit DWORD Value window, under Value data:, change the value to 110. Click OK
Suggestion 2 :
This error could occur due to communication problem between Backup Exec server and tape device or device driver related issue. To resolve the issue, do the following:1. Go to devices tab, right click on device > properties > disable the device. Once again right click on the device and select delete to delete the device. Re-cycle Backup Exec services2. Refer the following link to download the latest device drivers for Backup Exec v10.0.
Suggestion 3:
If this does not help then look for Even ID: 7,9,11, and 15 in system event log to check SCSI or Hardware related issue.
We would suggest you to refer to the following suggestions to resolve this issue:1. Install Service pack1 for Backup exec v10.0 from the following link:2. Please refer to the following link to install the latest drivers:Verify the result.If above mentioned steps failed then refer next steps:3. Open Backup job properties.4. Click on Schedule and click on 'Run according to schedule'5. Under general options select 'Time window' and specify the timings according to your convenience. Also make sure that it should not interact with other jobs.
04-10-2007 01:31 PM
04-10-2007 05:07 PM