08-01-2009 09:30 AM
Solved! Go to Solution.
08-06-2009 08:53 PM
08-04-2009 03:04 PM
08-06-2009 08:53 PM
08-31-2009 08:16 AM
Hi rhanley,
I have the same issue with SCSI-3 reservation. Storage is ST6140/DS4700 with 7.50.x.x firmware, connected to the Windows 2003 server host with Emulex LPe11002 HBA (newest driver 2.20.6 and newest firmware 2.82a3)
I used utility suggested by you and here the output:
C:\SCSIcmd\SCSIcmd>scsicmd.exe -d4 -sscsi3_test
********************** SCSI-3 SUPPORT TEST ***********************************
* The SCSI-3 SUPPORT TEST performs a set of SCSI-3 PR on disk(s) specified in *
* -d option. *
* SCSICMD uses the predefined '1234567812345678' key in SCSI-3 support test. *
* *
* Make sure that the testing shouldn't be under the cluster resource. *
* *
* If SFW DMP (5.0 DDI-3/5.1 GA/5.1 DDI-1 or a newer DDI version) hasn't been *
* installed nor claim the disk, make sure that there is only one HBA path *
* connected to the disk(s) from the testing host before running SCSICMD tool. *
*******************************************************************************
Harddisk4
Scsi Address
------------------
Length : 0x8
PortNumber : 0x3
PathId : 0x0
TargetId : 0x2
Lun : 0x1
******** PERFORM SCSI-3 PR OPERATION TESTS ON Harddisk4 *************
===>Test #1: Clean up any SCSI-3 keys left on harddisk4
Test #1 - **** PASSED. There is no SCSI-3 key left on the disk: #4.
===> Test #2: Perform SCSI-3 Register action on harddisk4 with SCSI-3 key: 7856341278563412
Test #2 - Successfully issued SCSI-3 Register action.
Test #2 - Checking...There should be a registered key on harddisk4
SCSI3 registered keys on harddisk4
Key: 7856341278563412
Key: 7856341278563412
Key: 7856341278563412
Key: 7856341278563412
Test #2 - *** PASSED. Successfully performed SCSI-3 Register Service Action.
===> Test #3: Perform SCSI-3 reservation action on harddisk4 with SCSI-3 key: 7856341278563412
Test #3 - Successfully issued SCSI-3 reservation action.
Test #3 - Checking...Reading the SCSI-3 reservation holder
SCSI3 reservation holder key on harddisk4
Key: 7856341278563412
Test #3 - *** PASSED. Successfully performed SCSI-3 Reservation Action.
==> Test #4: Perform SCSI-3 release action on harddisk4 with SCSI-3 key: 7856341278563412
Test #4 - Successfully issued SCSI-3 release action.
Test #4 - Checking...There should be none SCSI-3 reservation holder left on the disk.
Test #4 - *** Failed. There is a SCSI-3 holder left on harddisk4.
C:\SCSIcmd\SCSIcmd>scsicmd.exe -d4 -sscsi3_release
************************* SCSI-3 RELEASE OPERATION ****************************
* The SCSI-3 RESERVATION performs SCSI-3 release on disk(s) given in the *
* -d option. *
* *
* If SFW DMP (5.0 DDI-3/5.1 GA/5.1 DDI-1 or a newer DDI version) hasn't been *
* installed nor claim the disk, make sure that there is only one HBA path *
* connected to the disk(s) from the testing host before running SCSICMD tool. *
*******************************************************************************
Harddisk4
Scsi Address
------------------
Length : 0x8
PortNumber : 0x3
PathId : 0x0
TargetId : 0x2
Lun : 0x1
Harddisk4 has the current SCSI-3 reservation holder:
0000000000000000
***** PGR OUT <== RELEASE operation on harddisk4 *****
Scsi Address
------------------
Length : 0x8
PortNumber : 0x3
PathId : 0x0
TargetId : 0x2
Lun : 0x1
Retry flag: 0
psptdwb->sptd.ScsiStatus: 0x0
Error: 170 The requested resource is in use.
ERROR: Unable to perform SCSI-3 release action on harddisk4.
The disk may be been under a cluster resource or
has been SCSI-3 reserved by another HBA iniator/host.
C:\SCSIcmd\SCSIcmd>
So import as dynamic disk group works fine, but as cluster disk group does not work.
I appreciate any ideas,
Thanks in advance