10-31-2014 06:23 AM
Hi all,
Recently I removed the migration configuration for TSM on an old Store Partition (EV 9.0.2), and reconfigured the partition to use the EV Migrator and an EMC DataDomain CIFS share.
2 weeks ago the trial on one of the 12 partitions worked a treat, however today rolling out to the rest of the servers... the data was sent to the root of the C: drive, filling it up and shutting EV down across 10 of the 11 servers updated (One server did nothing at all).
I have run through all the configurations and they definately point to accessable CIFS shares.
At the moment I have stopped migrations, copied the data to where it should have gone in the first place and restarted services.
I now need to find out what happened and how to rectify it.
Any help at all would be greatly appreciated!!
Best Regards
Guy
10-31-2014 06:58 AM
Hello,
If you copy the location as defined in the Migrator tab, and past that in the 'run' prompt, does that location open?
I am not sure if extra configuration is needed when using a DD, but it might be that somehow EV tries to see the location, can't find it, and then perhaps is redirected to c:\ ?
Any strange events in eventviewer?
10-31-2014 07:14 AM
Hi Gertjan,
The CIFS shares are accessable from all servers in the Storage Group.
I have seen no strange events beyond what normally occurs on this platform.
I'm not sure redirecting to an alternative location if a CIFS share is unavailable would be a good idea!! I really hope not!
Guy
11-02-2014 05:45 AM
Hi Guy,
I do agree. It probably is best to call support, as they are able to verify the config, and possibly advise what to trace to see where it goes wrong.