11-18-2010 12:53 AM
Gentlemen,
Considering two archiving servers(evsrv1,evsrv2) in the same EV site, can i use the Building block technology to make use of evsrv2 to take over services for evsrv1, in case of evsrv1 failure OR should i need a spare server with just the EV services installed but not doin any archiving..pls help
Solved! Go to Solution.
11-18-2010 12:59 AM
You can use EV Server 2 to host EV Server 1's work in a DR event. However it is worth noting if Server 2 is busy and you ask it to take on server 1's load it may tip it over the edge. In this scenario I would suggest you put EV in to read only mode.
11-18-2010 12:59 AM
You can use EV Server 2 to host EV Server 1's work in a DR event. However it is worth noting if Server 2 is busy and you ask it to take on server 1's load it may tip it over the edge. In this scenario I would suggest you put EV in to read only mode.
11-18-2010 05:11 AM
In your configuration you should put the Indexes and Vault Stores in different drive letters on the two servers so that you don't have any conflicts in a failover scenario.
11-19-2010 01:59 AM
Thanks a lot guys..much appritiated