09-15-2017 03:11 AM
Dear Team,
Please let me know How to search and find error in dtrace log. i havent any knowledge about dtrace in Enterpriuse vault please let me know how to use dtrace and how to find error or issue in dtrace log.
Thanks in Advance,
Pravin Goud.
Solved! Go to Solution.
09-15-2017 11:03 AM
Hi Pravin,
it depents on the issues you are having. For example you see errors messages related to mailbox archiving start with tracing the archivetask process. Use the EventID that is occuring and follow the thread that is throwing the error until you do find the initial error.
Let me show you an example. ArchivingTask is giving me error eventID 3460
398 19:32:10.983 [15588] (ArchiveTask) <26704> EV~E Event ID: 3460 The Task 'Exchange Mailbox Archiving Task for EX2013' failed to log on to Exchange server 'EX2013' ......
going this thread a bit up is giving me:
394 19:32:10.983 [15588] (ArchiveTask) <26704> EV:H {CAgentTask::Initialise:#1361} Failed to open privileged MAPI session: [0x8004011d]. Aborting agent startup.
You then should try to find the initial occurence which is in my case:
379 19:32:10.983 [15588] (ArchiveTask) <26704> EV:L {HrMAPIOpenMsgStoreKvs:#59} Opened msg store [0x8004011d]
Based on that information you could do some google searches or take a look at the Veritas KB. The following technote is helpful to find the correct processes to trace:
List of DTrace processes and descriptions of each process responsibility.
https://www.veritas.com/support/en_US/article.TECH129595
You could also let us know the specific errors you are facing and we can try to assist on this
Regards
Marc
09-16-2017 10:29 PM - edited 09-16-2017 10:29 PM
Hi there,
To add to what Marc said, here there is another article that provides some good DTrace basics:
https://vox.veritas.com/t5/Articles/DTRACE-Basics/ta-p/807016
09-17-2017 12:41 PM
09-18-2017 04:41 AM
nice article Rob.
To summarize for someone who has not used it at all.
You use Dtrace to troubleshoot certain EV problems. Therefore you have to recreate the problem and the log will document the errors on a deeper level.
Important: to see Dtrace in the console you need to:
1. click Tools in Taskbar>>Enable Advanced Features
2. Rightclick EV-Server >> refresh
Only then you can see the option to dtrace.
After this step you can open Dtrace and rightclick to create a new Dtrace.
Some Dtraces can only be done with commandline though atleast as standard tasks.
09-15-2017 11:03 AM
Hi Pravin,
it depents on the issues you are having. For example you see errors messages related to mailbox archiving start with tracing the archivetask process. Use the EventID that is occuring and follow the thread that is throwing the error until you do find the initial error.
Let me show you an example. ArchivingTask is giving me error eventID 3460
398 19:32:10.983 [15588] (ArchiveTask) <26704> EV~E Event ID: 3460 The Task 'Exchange Mailbox Archiving Task for EX2013' failed to log on to Exchange server 'EX2013' ......
going this thread a bit up is giving me:
394 19:32:10.983 [15588] (ArchiveTask) <26704> EV:H {CAgentTask::Initialise:#1361} Failed to open privileged MAPI session: [0x8004011d]. Aborting agent startup.
You then should try to find the initial occurence which is in my case:
379 19:32:10.983 [15588] (ArchiveTask) <26704> EV:L {HrMAPIOpenMsgStoreKvs:#59} Opened msg store [0x8004011d]
Based on that information you could do some google searches or take a look at the Veritas KB. The following technote is helpful to find the correct processes to trace:
List of DTrace processes and descriptions of each process responsibility.
https://www.veritas.com/support/en_US/article.TECH129595
You could also let us know the specific errors you are facing and we can try to assist on this
Regards
Marc
09-16-2017 10:29 PM - edited 09-16-2017 10:29 PM
Hi there,
To add to what Marc said, here there is another article that provides some good DTrace basics:
https://vox.veritas.com/t5/Articles/DTRACE-Basics/ta-p/807016
09-17-2017 12:41 PM
I fully endorse that link :)
09-18-2017 04:41 AM
nice article Rob.
To summarize for someone who has not used it at all.
You use Dtrace to troubleshoot certain EV problems. Therefore you have to recreate the problem and the log will document the errors on a deeper level.
Important: to see Dtrace in the console you need to:
1. click Tools in Taskbar>>Enable Advanced Features
2. Rightclick EV-Server >> refresh
Only then you can see the option to dtrace.
After this step you can open Dtrace and rightclick to create a new Dtrace.
Some Dtraces can only be done with commandline though atleast as standard tasks.
05-15-2018 11:13 PM
Hi Marcde,
Thank You So much for your answer
Regards,
Pravin Goud
Enterprise Vault Admin
05-15-2018 11:15 PM
Hi Rob,
Nice article :)
Thanks
Regards,
Pravin Goud
Enterprise Vault Admin