Follow my friend ...
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
dm-netlink version 0.0.2 loaded
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
GSI 32 sharing vector 0x3D and IRQ 32
ACPI: PCI Interrupt 0000:00:1a.7[D] -> GSI 19 (level, low) -> IRQ 61
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: irq 61, io mem 0xb2b22000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.16.60-0.101.1-smp-wan_2.1.1 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 16 (level, low) -> IRQ 217
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: irq 217, io mem 0xb2b21000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.16.60-0.101.1-smp-wan_2.1.1 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
vxfs: Loading module compiled for kernel version 2.6.16.60-0.54.5-smp into kernel version 2.6.16.60-0.101.1-smp-wan_2.1.1
fdd: Loading module compiled for kernel version 2.6.16.60-0.54.5-smp into kernel version 2.6.16.60-0.101.1-smp-wan_2.1.1
fdd: no version for "vx_vop_ioctl" found: kernel tainted.
vxportal: Loading module compiled for kernel version 2.6.16.60-0.54.5-smp into kernel version 2.6.16.60-0.101.1-smp-wan_2.1.1
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00:1a.0[D] -> GSI 19 (level, low) -> IRQ 61
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 61, io base 0x000080e0
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.16.60-0.101.1-smp-wan_2.1.1 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-4: new high speed USB device using ehci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1a.1[D] -> GSI 19 (level, low) -> IRQ 61
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 61, io base 0x000080c0
usb usb4: new device found, idVendor=0000, idProduct=0000
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.16.60-0.101.1-smp-wan_2.1.1 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.2[D] -> GSI 19 (level, low) -> IRQ 61
PCI: Setting latency timer of device 0000:00:1a.2 to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 61, io base 0x000080a0
usb usb5: new device found, idVendor=0000, idProduct=0000
usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.16.60-0.101.1-smp-wan_2.1.1 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 1-4: new device found, idVendor=0930, idProduct=1400
usb 1-4: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4: Product: TOSHIBA USB DRV
usb 1-4: Manufacturer: TOSHIBA
usb 1-4: SerialNumber: 070831FD0F90C767
usb 1-4: configuration #1 chosen from 1 choice
scsi9 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
ACPI: PCI Interrupt 0000:00:1d.0[D] -> GSI 16 (level, low) -> IRQ 217
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 217, io base 0x00008080
usb usb6: new device found, idVendor=0000, idProduct=0000
usb usb6: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.16.60-0.101.1-smp-wan_2.1.1 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[D] -> GSI 16 (level, low) -> IRQ 217
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 217, io base 0x00008060
usb usb7: new device found, idVendor=0000, idProduct=0000
usb usb7: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.16.60-0.101.1-smp-wan_2.1.1 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[D] -> GSI 16 (level, low) -> IRQ 217
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 217, io base 0x00008040
usb usb8: new device found, idVendor=0000, idProduct=0000
usb usb8: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.16.60-0.101.1-smp-wan_2.1.1 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usb 5-1: new full speed USB device using uhci_hcd and address 2
usb 5-1: new device found, idVendor=046b, idProduct=ff10
usb 5-1: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-1: Product: Virtual Keyboard and Mouse
usb 5-1: Manufacturer: American Megatrends Inc.
usb 5-1: SerialNumber: serial
usb 5-1: configuration #1 chosen from 1 choice
usb 8-2: new low speed USB device using uhci_hcd and address 2
usb 8-2: new device found, idVendor=0624, idProduct=0294
usb 8-2: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-2: Product: Dell 03R874
usb 8-2: Manufacturer: Avocent
usb 8-2: configuration #1 chosen from 1 choice
usbcore: registered new driver hiddev
input: American Megatrends Inc. Virtual Keyboard and Mouse as /class/input/input1
input: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.2-1
input: American Megatrends Inc. Virtual Keyboard and Mouse as /class/input/input2
input: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.2-1
input: Avocent Dell 03R874 as /class/input/input3
input: USB HID v1.10 Keyboard [Avocent Dell 03R874] on usb-0000:00:1d.2-2
input: Avocent Dell 03R874 as /class/input/input4
input: USB HID v1.10 Mouse [Avocent Dell 03R874] on usb-0000:00:1d.2-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Vendor: TOSHIBA Model: TOSHIBA USB DRV Rev: PMAP
Type: Direct-Access ANSI SCSI revision: 04
SCSI device sdd: 31309824 512-byte hdwr sectors (16031 MB)
sdd: Write Protect is off
sdd: Mode Sense: 23 00 00 00
sdd: assuming drive cache: write through
SCSI device sdd: 31309824 512-byte hdwr sectors (16031 MB)
sdd: Write Protect is off
sdd: Mode Sense: 23 00 00 00
sdd: assuming drive cache: write through
sdd: sdd1
sd 9:0:0:0: Attached scsi removable disk sdd
sd 9:0:0:0: Attached scsi generic sg5 type 0
usb-storage: device scan complete
loop: loaded (max 8 devices)
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
sisips: Loading module compiled for kernel version 2.6.16.60-0.54.5-smp into kernel version 2.6.16.60-0.101.1-smp-wan_2.1.1
SISIPS major: 252
SISIPS linux version code: 132624
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
vxdmp: Loading module compiled for kernel version 2.6.16.60-0.54.5-smp into kernel version 2.6.16.60-0.101.1-smp-wan_2.1.1
vxio: Loading module compiled for kernel version 2.6.16.60-0.54.5-smp into kernel version 2.6.16.60-0.101.1-smp-wan_2.1.1
vxspec: Loading module compiled for kernel version 2.6.16.60-0.54.5-smp into kernel version 2.6.16.60-0.101.1-smp-wan_2.1.1
ADDRCONF(NETDEV_UP): eth0: link is not ready
dmpaa: Loading module compiled for kernel version 2.6.16.60-0.54.5-smp into kernel version 2.6.16.60-0.101.1-smp-wan_2.1.1
dmpap: Loading module compiled for kernel version 2.6.16.60-0.54.5-smp into kernel version 2.6.16.60-0.101.1-smp-wan_2.1.1
dmpjbod: Loading module compiled for kernel version 2.6.16.60-0.54.5-smp into kernel version 2.6.16.60-0.101.1-smp-wan_2.1.1
VxVM vxdmp V-5-0-34 added disk array DISKS, datype = Disk
VxDMP1: p1 p2 p3
VxDMP2: p1 p2
VxDMP3: p1 p2
ADDRCONF(NETDEV_UP): eth1: link is not ready
igb: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
sdb : very big device. try to use READ CAPACITY(16).
SCSI device sdb: 76171849728 512-byte hdwr sectors (38999987 MB)
sdb: Write Protect is off
sdb: Mode Sense: 1f 00 00 08
SCSI device sdb: drive cache: write back
sdb: sdb1 sdb2
VxDMP3: p1 p2
sdc : very big device. try to use READ CAPACITY(16).
SCSI device sdc: 9755852800 512-byte hdwr sectors (4994997 MB)
sdc: Write Protect is off
sdc: Mode Sense: 1f 00 00 08
SCSI device sdc: drive cache: write back
sdc: sdc1 sdc2
VxDMP2: p1 p2
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
IA-32 Microcode Update Driver v1.14 unregistered
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
igb 0000:01:00.1: TSO is Disabled
igb 0000:01:00.0: TSO is Disabled
tcp_fast: Loading module compiled for kernel version 2.6.16.60-0.85.1-smp into kernel version 2.6.16.60-0.101.1-smp-wan_2.1.1
Installing tcp_fast hooks
register fsl sysctls ...
eth1: no IPv6 routers present
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
igb: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
igb: eth1 NIC Link is Down
ipmi message handler version 38.2
IPMI System Interface driver.
ipmi_si: Found SMBIOS-specified state machine at I/O address 0xca2, slave address 0x20
igb: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
IPMI kcs interface initialized
ipmi device interface
ADDRCONF(NETDEV_UP): eth2: link is not ready
ixgbe 0000:09:00.0: eth2: detected SFP+: 5
ADDRCONF(NETDEV_UP): eth3: link is not ready
ixgbe 0000:09:00.1: eth3: detected SFP+: 6