removing of Puredisk diskpool

[demo4119]

I have performed the below mentioned .

(STEPS REMOVED, AS YOU SHOULD NOT DO THEM)

I do faced issue when perform the steps 8 . error meessage unable to connect socket. I found that my netbackup EMM service will be hanged and Windows event viewer are showing that netbackup EMM is shutting down unexpendedly for 4 times.

In order to bring the Netbackup services back to woring condition , i need to bpdown -v -f and bpup -v -f .

Please advise.

{ EDIT: If you arrived at this thread looking for the procedure to remove a PD diskpool, please consult this TechNote:

Removing media server deduplication
 http://symantec.com/docs/HOWTO70635

This text can also be found on pages 213-4 of the NetBackup Dedup Guide:

Symantec NetBackup 7.5 Deduplication Guide
 http://symantec.com/docs/DOC5187

-CRZ}

[demo4119]

Is there a command to check on the image on the problematic disk pool .

[demo4119]

I saw this error on the netbackup admin log when the deletion of disk pool failed.

17:41:37.641 [6024.5200] <2> dsm_get_diskgroupinfo: dsmlib:.\dsmlib_diskgroup.cpp:dsm_get_diskgroupinfo:243 <32> CORBA exception: system exception, ID 'IDL:omg.org/CORBA/COMM_FAILURE:1.0'

TAO exception, minor code = 13 (failed to recv request response; ECONNRESET), completed = MAYBE

17:41:37.641 [6024.5200] <16> bpverify: unable to obtain disk pool information(2050301): puredisk01(PureDisk)@master01

17:41:37.641 [6024.5200] <2> bpverify: Error obtaining disk media id information : error (190)

17:41:37.641 [6024.5200] <2> bpverify: EXIT status = 190

[demo4119]

Faulting application nbemm.exe, version 7.1.2011.1207, time stamp 0x4ee0082b, faulting module libnbbase.dll, version 7.1.2011.1207, time stamp 0x4edffffd, exception code 0x80000003, fault offset 0x000000000001f531, process id 0xf98, application start time 0x01ccec7ced8ad4f6.

[watsons]

Not sure if you have solved your issue...

From this msg:  bpverify: unable to obtain disk pool information(2050301): puredisk01(PureDisk)@master01

I am thinking the sequence of your step #7 & #8 should be reversed, that means deleting disk pool comes first before deleting storage server. When creating a disk pool, a storage server is required first.

[demo4119 · Accepted solution]

TSE provided me the Clean up script

[ABs2011]

DO NOT FOLLOW THE STEPS SHOWN IN THE FIRST POST IN THIS FORUM PAGE, THEY ARE IN THE WRONG ORDER. The DISK VOLUME and Disk Pool , Must be deleted before the STORAGE SERVER is.