09-20-2022 11:10 PM
Anyone added a second DD to a storageserver (as replacement over few months) Just add as another DiskPool, or ?
Solved! Go to Solution.
09-20-2022 11:19 PM
You have to follow the procedure from the beginning.
create a new storage server
create a new disk pool
create a new storage unit
09-20-2022 11:19 PM
You have to follow the procedure from the beginning.
create a new storage server
create a new disk pool
create a new storage unit
09-21-2022 12:12 AM
Are you sure? I can add another storageserver as long as it's not same type as already configured, but not of same type (ex. AdvDisk). In my lab I have one MSDP and one AdvDisk storageserver on my one primary/media server. But get error when trying to add another of any same type. (storageserver xxxxx already exist in NetBackup.).
-
09-21-2022 12:15 AM
You can have multiples of the same type of storage server. Provided the names/IPs are different. That's where your conflict comes in.
09-21-2022 12:20 AM
you can have only one MSPD and adv storage server but multiple "other vendor" storage servers.
As Laurence_Merry said, if the new device have different IP, you must to create a new storage server.
On the other hand, if for any reason you need to create multiple disk pools for the same storage server, this is doable.
09-21-2022 12:51 AM
To further clarify, the storage server is the device/system that performs the storage operations. You can have only one storage server defined per device/system.
For MSDP and AdvDisk this is the media server, so only one MSDP pool (let's ignore cloud pools for now).
Each DataDomain will be a storage server, they can be configured (I believe) with multiple disk pools.
David
10-13-2022 05:47 AM
And we got this far... The old DD's are ok still in production. The old DiskPools are source and targets DD-replicated. Non-targeted AIR since forever, NBU9.1.0.1 Boost 7.8.0.0 and DDOS 7.7.2.10 (initially X masters, now 2) (Yes, I prefer targeted AIR)
I have issues getting the new DD's to do similar, SLP conf: "No import SLP(s) found with compatible replication target device(1591)". NBU UI does recognize the DD-volumes as source and targets (in DD-replication).
Then creating new non-replicating DD-volumes, one each DD. Trying SLP-conf: add backup ok, add replication, only non-targeted possible (targeted greyed out). OK/save got: "The source copy for a duplication to remote master is not capabel of replication (error 1528)" eeeeh...?
10-13-2022 05:50 AM
check if media servers have other master certificates.
10-13-2022 06:53 AM
Cert's ok, can ping and see/backup all nbu-servers to/from both nbu-domains. Still confused...