03-22-2012 03:40 AM
HI All,
We are facing issue while creating the flahsbackup policy for solaris server.
Kindly find the below snapshot for snapshot client option.
We are getting 223 status error.
Master Server :- SunOS --- 5.10 Generic_144488-17 sun4u sparc SUNW,Sun-Fire-480R
NBU Version :- 6.5.4
Client Server :- SunOS --- 5.10 Generic_125100-07 sun4u sparc SUNW,Sun-Fire-V490
Kindly confirm , more details needed.
Regds,
Sagar
Solved! Go to Solution.
03-22-2012 04:08 AM
Have you gone through this section in NBU 6.5 Snapshot Client Admin Guide http://www.symantec.com/docs/TECH52823 :
Chapter 9: Configuration of legacy snapshot methods for disk arrays
This chapter provides configuration assistance for the three Snapshot Client
disk array methods that are deprecated in NetBackup 6.5. These methods are
EMC TimeFinder, Hitachi ShadowImage, and HP BusinessCopy. They are
supported in NetBackup 6.5, but will be removed in a future release.
See the “Configuration of snapshot methods for disk arrays” chapter for
information on the newer disk array methods.
The following topics are covered in this chapter:
■ Overview
■ Configuration checklist
■ Disk configuration requirements
■ Configuring primary and secondary disks
■ Volume Manager configuration
■ Best practices
03-22-2012 04:08 AM
Have you gone through this section in NBU 6.5 Snapshot Client Admin Guide http://www.symantec.com/docs/TECH52823 :
Chapter 9: Configuration of legacy snapshot methods for disk arrays
This chapter provides configuration assistance for the three Snapshot Client
disk array methods that are deprecated in NetBackup 6.5. These methods are
EMC TimeFinder, Hitachi ShadowImage, and HP BusinessCopy. They are
supported in NetBackup 6.5, but will be removed in a future release.
See the “Configuration of snapshot methods for disk arrays” chapter for
information on the newer disk array methods.
The following topics are covered in this chapter:
■ Overview
■ Configuration checklist
■ Disk configuration requirements
■ Configuring primary and secondary disks
■ Volume Manager configuration
■ Best practices
07-12-2012 10:27 PM
Hi Marriane ,
apologise for late reply ,
We have checked in details with our TSE team and we found that Vxvm Version is low than the required on destination server.
We provide the solution to upgrade the same to latest version.
Regds,
Sagar