07-26-2011 01:13 AM
Can there some vcs for netbackup documents or templates?
Solved! Go to Solution.
07-28-2011 10:46 PM
Thanks very much. I have resolve this.
The reason is License may be Enterprise netbackup server license.
I use dameo license .Install nbu master cluster successfully.
Vcs is 4.1
07-26-2011 01:29 AM
07-26-2011 03:05 AM
Don't do it or don't do it without right EBB if you plan to use 7.1 + VCS. It's kinda unusable right now - crashing like every 4-8 hours.
http://www.symantec.com/business/support/index?page=content&id=TECH158909&key=15143&actp=LIST
EDIT: on RHEL/SLES at least
07-26-2011 05:43 AM
I have read the docuement.But there is nothing usefull. How to start netbackup server in vcs? How to monitor ? Which type of resources should be made?
How to failover?
I use a script I wrote to start ,stop,monitor nbu in vcs.But have many problems.It can switchover manually but can not failover when the active node shutodown.
Install nbu first or vcs?
07-26-2011 05:58 AM
Sorry, seems the ontent in the docs changed from 7.0 to 7.1. Please look at this one, chapter 3 or 4 depending on your OS.
http://www.symantec.com/docs/DOC3679
07-26-2011 06:29 AM
Nick, your questions are VCS-related. You should ideally book yourself on a VCS training course or read VCS admin guide...
VCS commands are the same no matter which application you are clustering.
07-26-2011 07:10 AM
Hi,
There is a Agent for NetBackup, you don't need to write your own script. Probably not supported via your script either.
Read the guide i posted last.
07-26-2011 11:38 PM
I have read the doucment.I remove the nbumaster and install again but I don't met this
■ If you entered a virtual name for the server in the previous step, the
installation script presents the following question:
Is this server part of a cluster installation?
If the answer is yes, press y and answer the series of cluster configuration
questions that appear.
os : suse10sp2
nbu: 7.0.1
vcs:4.1.30.00-MP3
vcs 4.1 not support nbu7.0.1?
07-27-2011 01:03 AM
PLEASE UPGRADE !!!
SF/HA is reaching EOL end of THIS month.
Please also check the NetBackup 7 Cluster (CL): http://www.symantec.com/docs/TECH126902
seems 4.1 is (still) supported for certain OS versions.
You have never mentioned your OS?
If it is Unix/Linix, PLEASE go through ALL the requirements carefully before attempting to install.
e.g. : you MUST have rsh enabled between the two nodes.
07-27-2011 02:55 AM
Thanks for your reply.
In our system there are many clusters all vcs4.3.
I read the NetBackup 7.x Cluster Compatibility List. But there is no suse10 OS only suse 11. This means suse10 not support nbu cluster? Are you sure ?
VCS 5.1 SUSE Enterprise Linux Server 11 x86-64 Master 7.0
I follow the "NetBackup_AdminGuide_ClusteredMasterServer.pdf " document every requirement is ok.
07-27-2011 05:47 AM
Kindly navigate below URL for recent compatibility for VCS version from 5.0 to 5.1 SP1.
https://sort.symantec.com/checklist/install
You may need VCS 5.0MP3 & 5.0MP4 for SUSE Enterprise Linux Server 10.
07-28-2011 10:46 PM
Thanks very much. I have resolve this.
The reason is License may be Enterprise netbackup server license.
I use dameo license .Install nbu master cluster successfully.
Vcs is 4.1