03-04-2015 09:47 AM
Hi All,
can someone help me to resolve netbackup master server upgrade fail with error
Database server [NB_cssnetbkp] not available.
Exiting from create_nbdb, status[77]”
while upgrade netbackup master server from 7.1.0.3 to 7.6.0.1
o/s :- solaris 10
Solved! Go to Solution.
03-05-2015 03:23 AM
The command must be run after failed upgrade as per TECH54607.
Probably best to find the reason for the failure before you do anything.
Check the log in /usr/openv/netbackup/logs/nbdb for clues.
More TNs with possible reasons:
NBDB database schema failed to upgrade due to a missing entry from the vxdbms.conf.
http://www.symantec.com/docs/TECH180071
NBDB upgrade fails with "All threads are blocked".
http://www.symantec.com/docs/TECH186968
Another one that matches your error:
The installation of NetBackup Master Server may fail while it processes create_nbdb if many network interfaces are active.
http://www.symantec.com/docs/TECH181623
PS:
Have you checked all pre-req's for 7.6?
Such as memory requirements?
03-04-2015 12:03 PM
TECH54607 might be a solution for you.
Solution
This issue can corrected by running the following:
UNIX: /usr/openv/db/bin/nbdb_upgrade -dbn {database_name}
Windows: <install_path>\NetBackup\bin\nbdb_upgrade -dbn {database_name}
Example is as follows on a machine that failed the database upgrade:
nbdb_upgrade -dbn NBDB
nbdb_upgrade: NBDB version 6.0.3.0 verified.
Upgrading to 6.0.4.0
Database validation successful.
03-04-2015 06:29 PM
03-05-2015 02:15 AM
Hi Marianne,
not yet upgrade completed, the rman issue on other master server
the master server which failed while upgrade still exisit, we are planning to upgrade in couple of weeks
03-05-2015 02:19 AM
Hi SymTerry,
so i have to perform below mention steps before upgrade?
/usr/openv/db/bin/nbdb_upgrade -dbn NB_cssnetbkp
then i can start upgrade by ./install ? please advice.
03-05-2015 03:23 AM
The command must be run after failed upgrade as per TECH54607.
Probably best to find the reason for the failure before you do anything.
Check the log in /usr/openv/netbackup/logs/nbdb for clues.
More TNs with possible reasons:
NBDB database schema failed to upgrade due to a missing entry from the vxdbms.conf.
http://www.symantec.com/docs/TECH180071
NBDB upgrade fails with "All threads are blocked".
http://www.symantec.com/docs/TECH186968
Another one that matches your error:
The installation of NetBackup Master Server may fail while it processes create_nbdb if many network interfaces are active.
http://www.symantec.com/docs/TECH181623
PS:
Have you checked all pre-req's for 7.6?
Such as memory requirements?
03-11-2015 03:14 AM
yes we had verified all the prerequest
03-11-2015 03:44 AM
I have posted a lot more than just asking about pre-req's....