cancel
Showing results for 
Search instead for 
Did you mean: 

Restore of Exchange 2003 database ends with error 2826

shiraz_mj
Level 3

Hi,

I am restoring an Exchange 2003 database and I am getting the above error.  I am running Exchage on a cluster and I am initiating the restore from the Netbackup Master server.  I have created the Recovery Storage group and attached the datastore to be restored.  I have done restores previously for this same datastore which were successfull.  However, on this particular backup image, I cannot see the log files and also since I am restoring from an old image, my original storage group is different from the one that is being restored.  I tried "Restoring Everything to a Different Location (maintaining existing structure)", but get the same result.  Below is the status message;

12/3/2012 3:03:51 PM - begin Restore
12/3/2012 3:03:56 PM - 1 images required
12/3/2012 3:03:56 PM - media 0192L3 required
12/3/2012 3:03:56 PM - media 0171L3 required
12/3/2012 3:04:08 PM - restoring image fr-exchange_1270131019
12/3/2012 3:04:09 PM - Info bpbrm(pid=6220) fr-exchange is the host to restore to     
12/3/2012 3:04:09 PM - Info bpbrm(pid=6220) telling media manager to start restore on client    
12/3/2012 3:04:10 PM - requesting resource 0192L3
12/3/2012 3:04:10 PM - granted resource 0192L3
12/3/2012 3:04:10 PM - granted resource IBM.ULT3580-TD3.001
12/3/2012 3:04:11 PM - mounted
12/3/2012 3:04:11 PM - Info bptm(pid=8568) 0192L3           
12/3/2012 3:04:11 PM - Info bptm(pid=8568) INF - Waiting for positioning of media id 0192L3 on server cen-backup for reading.
12/3/2012 3:04:11 PM - positioning 0192L3 to file 43
12/3/2012 3:04:11 PM - Info bpbrm(pid=8216) fr-exchange is the host to restore to     
12/3/2012 3:04:11 PM - connecting
12/3/2012 3:04:12 PM - Info bpbrm(pid=8216) start tar32 on client        
12/3/2012 3:04:13 PM - positioned 0192L3; position time: 00:00:02
12/3/2012 3:04:13 PM - begin reading
12/3/2012 3:04:19 PM - Info tar32(pid=8732) Restore started.          
12/3/2012 3:04:19 PM - connected; connect time: 00:00:08
12/3/2012 3:04:19 PM - Error bpbrm(pid=8216) from client fr-exchange: ERR - Aborting restore: Error writing Exchange object: Microsoft Information Store:\First Storage Group\Admin Audit Error: BEDS 0xE000030B: The database must be created prior to restore.
12/3/2012 3:04:19 PM - Warning bpbrm(pid=8216) from client fr-exchange: WRN - You must restore the logs from the last backup set for Microsoft Information Store:\First Storage Group\ by itself for proper recovery.
12/3/2012 3:04:19 PM - Info tar32(pid=8732) done. status: 5         
12/3/2012 3:04:19 PM - Error bptm(pid=9472) cannot write data to socket, 10053      
12/3/2012 3:04:19 PM - Info tar32(pid=8732) done. status: 185 - tar did not find all the files to be restored
12/3/2012 3:04:19 PM - Info bpbrm(pid=6220) child done, status 185        
12/3/2012 3:04:19 PM - Info bpbrm(pid=6220) sending message to media manager: STOP RESTORE fr-exchange_1270131019    
12/3/2012 3:04:19 PM - Error bptm(pid=9472) The following files/folders were not restored:      
12/3/2012 3:04:19 PM - Error bptm(pid=9472) UTF - /Microsoft Information Store/First Storage Group/Admin Audit    
12/3/2012 3:04:20 PM - Info bpbrm(pid=6220) media manager for backup id fr-exchange_1270131019 exited with status 150: termination requested by administrator
12/3/2012 3:04:20 PM - restored image fr-exchange_1270131019 - (tar did not find all the files to be restored(185)); restore time 00:00:12
12/3/2012 3:04:20 PM - end Restore; elapsed time: 00:00:29
invalid error number(2826)

Would appreciate any help.

Thanks

Shi_mj

 

2 REPLIES 2

Will_Restore
Level 6

The above-mentioned error message is observed when either of the following conditions exist:

1. When attempting to restore a Mailbox Store backup to a Recovery Storage Group where the Recovery Storage Group has been created but the Mailbox Store has not been added to it

OR

2. When attempting to restore an Information Store (Mailbox Store) to a production database when the Mailbox Store is currently in a mounted state
 

URL http://www.symantec.com/docs/TECH33317

 

shiraz_mj
Level 3

Hi,

I have created the RSG and added the datastore but didn't mount it.  But at the time the backup was taken, the datastore resided in a different storage group (First Storage Group).  But now it has been moved to a different SG