12-02-2010 06:07 AM
Hello people
Just a simple question: How I can set the duplication job to use 2 drives? (Split the duplication job to differents batches and use 2 drives)
We have 2 LTO4 drives and running a Vault Job for Duplicated data using a NDMP Storage Unit with 2 drives for write. When I start the Vault Duplication Job, I see this:
12/2/2010 8:09:39 AM - begin Duplicating
12/2/2010 8:09:39 AM - vault duplication validation of 1 images failed: Already duplicated
12/2/2010 8:09:39 AM - starting duplication batch 1 of 1 for 200 images
12/2/2010 8:09:44 AM - duplication batch 1 started. Job ID: 123456
All time Netbackup are using just 1 drive. If I have 2 drive available, Why Netbackup use just 1?
Maybe the issue is because all the images can be writting on the same tape and not on differents tapes. It's correct?
Do I need to change any file or configuration?
Thanks for your help.
Solved! Go to Solution.
12-08-2010 06:06 AM
I have found the following TN's:
Old, but seemingly still valid 5.1 doc: http://www.symantec.com/docs/TECH42877
http://www.symantec.com/docs/TECH44719
http://www.symantec.com/docs/TECH77933
12-02-2010 09:10 AM
Any idea or comment on this?
12-03-2010 12:22 PM
Any idea or comment on this?
12-03-2010 10:19 PM
You required 2 drive for duplication
12-03-2010 10:31 PM
How many drives do you have in total? And where are you duplicating from?
"We have 2 LTO4 drives"
If you only have 2 drives and duplicating tape-to-tape then one will be used as read drive and one as write drive.
Your post and extract from Activity Monitor does not have enough information...
12-06-2010 04:28 AM
I have 2 LTO 4 drives for write to tapes.
My duplication job it's looking images from a Storage Disk (Not Tape to Tape).
Sourge = Storage Disk
Destination = 2 LTO4 Drives (Tape)
12-08-2010 04:05 AM
Any Idea on this?
12-08-2010 06:06 AM
I have found the following TN's:
Old, but seemingly still valid 5.1 doc: http://www.symantec.com/docs/TECH42877
http://www.symantec.com/docs/TECH44719
http://www.symantec.com/docs/TECH77933