05-16-2014 09:10 AM - edited 07-06-2018 07:12 AM
I'm attempting to enable synthetic backups in my environment. I'm trying to run the following command on my master server for each of my disk pools.
nbdevconfig -changedp -dp US_DC1_DISK_DC1DISKO1_LSU02 -stype DataDomain -setattribute OptimizedImage
But I'm getting the following message when I run the command.
DSM was unable to find the following disk pool: US_DC1_DISK_DC1DISK01_LSU02(DataDomain)@master.domain.com
Unable to update
failed to change disk pool, invalid command parameter
Solved! Go to Solution.
05-16-2014 10:21 AM - edited 07-06-2018 07:28 AM
Rather copy & paste the name. You made a typo error.
Your DP name:
US_DC1_DISK_DC1DISKO1_LSU02
US_DC1_DISK_DC1DISK01_LSU02
Actual name above.
See the mistake?
05-16-2014 09:25 AM
does that disk pool appear when running the following command?
nbdevquery -listdp
05-16-2014 09:30 AM - edited 07-06-2018 07:14 AM
Yes
V7.5 US_DC1_DISK_DC1DISK01_LSU02 1 108889.30 108889.30 1 98 80 -1 dc1disk01-ost.domain.com
05-16-2014 10:19 AM
OK, try advice in this technote
http://www.symantec.com/business/support/index?page=content&id=TECH186600
05-16-2014 10:21 AM - edited 07-06-2018 07:28 AM
Rather copy & paste the name. You made a typo error.
Your DP name:
US_DC1_DISK_DC1DISKO1_LSU02
US_DC1_DISK_DC1DISK01_LSU02
Actual name above.
See the mistake?
05-16-2014 10:55 AM
You are absolutely right Marianne. Thank you
05-16-2014 11:06 AM
We've ALL done it at some point in time!