12-01-2014 11:10 PM
product : sfwha 5.1
os : windows 2003 enterprise
issue : The active normal, but when the hastart in the standby to the error occurred.
hastart
VCS INFO V-16-1-11020 Starting HAD on local node
VCS ERROR V-16-11109 Cannot start had. Error=1068, ErrorText=The dependency service or group failed to start.
-cluster status
active node
C:\Users\Administrator.AD> lltstat -n
LLT node information:
Node State Links
0 TEST1 OPEN 2
* 1 TEST2 OPEN 2
C:\Users\Administrator.AD> gabconfig -a
GAB Port Memberships
===============================================================
Port a gen 143b01 membership 01
Port h gen 143b03 membership ;1
Port h gen 143b03 visible 0
C:\Users\Administrator.AD>
standby node
C:\Users\Administrator.AD> lltstat -n
LLT node information:
Node State Links
* 0 TEST1 OPEN 2
1 TEST2 OPEN 2
C:\Users\Administrator.AD> gabconfig -a
GAB Port Memberships
===============================================================
Port a gen 143b01 membership 01
C:\Users\Administrator.AD>
12-02-2014 12:02 AM
check is vcscomms service is started on that node. you'll probably find its not which means LLT and/or GAB is not running.
12-02-2014 05:30 AM
Hi smileagain,
If you check your event logs you may have an "incorrect function" error when trying to start the vcscomm service. This typically means that there is a problem with the LLT configuration. If this is the case then run the Veritas Cluster Configuration Wizard (vcw) to reconfigure the heartbeat network.
Thank you,
Wally
12-09-2014 08:42 PM
Hi smileagain,
If you check your event logs you may have an "incorrect function" error when trying to start the vcscomm service. This typically means that there is a problem with the LLT configuration. If this is the case then run the Veritas Cluster Configuration Wizard (vcw) to reconfigure the heartbeat network.
Thank you,
Wally
12-09-2014 09:29 PM
Active NODE
C:\Users\Administrator.AD> lltstat -n
LLT node information:
Node State Links
0 TEST1 OPEN 2
* 1 TEST2 OPEN 2
C:\Users\Administrator.AD> gabconfig -a
GAB Port Memberships
===============================================================
Port a gen 143b01 membership 01
Port h gen 143b03 membership ;1
Port h gen 143b03 visible 0
C:\Users\Administrator.AD>
Standby NODE
C:\Users\Administrator.AD> lltstat -n
LLT node information:
Node State Links
* 0 TEST1 OPEN 2
1 TEST2 OPEN 2
C:\Users\Administrator.AD> gabconfig -a
GAB Port Memberships
===============================================================
Port a gen 143b01 membership 01
C:\Users\Administrator.AD>
01-07-2015 12:10 PM
As others have said, issue is probably vcscomms is not started so use "net start" to list running services to check if vcscomm is running and if not then start this service using "net start vcscomm" or start from service manager.
Mike
01-09-2015 05:16 AM
Seems port a (GAB) is running on both nodes, but port h only on one node.
Seems you have only issued 'hastart' on one node.
Issue hastart on standby node as well.