cancel
Showing results for 
Search instead for 
Did you mean: 
Storage Foundation for Windows
cancel
Showing results for 
Search instead for 
Did you mean: 

Discussion Posts

Resolved! How to adda node to the cluster SFWHA

Hi Team, We have NBu 7.6.0.3 hosted on Veritas SFWHA. We have lost primary node and now are working with passive node. We are planning to rebuild the primary node and add it back to cluster. Has any one done it please advice.   Regards.

BVshet by Level 5
  • 660 Views
  • 1 replies
  • 0 kudos

Resolved! Storage Foundation 6 and Windows 2003 MS Clustering

Hi . I having some issue to failover my cluster node databases drive after i have performed a restoration of the entire systems OS due to hardware faulty. We able to failover those shared drives outside the SFW configuration .   Can anyone advise...

demo4119 by Level 6
Partner Accredited Certified
  • 1018 Views
  • 3 replies
  • 1 kudos

The error occurs when hastart.

product : sfwha 5.1 os : windows 2003 enterprise issue : The active normal, but when the hastart in the standby to the error occurred.           hastart           VCS INFO V-16-1-11020 Starting HAD on local node           VCS ERROR V-16-11109 Ca...

Resolved! Unable to go offline

Hi everyone, I'm facing a problem when I try to take offline a Service Group, the issue is that one of the services of the service group, cannot go offline and it enters into the following state "Unable to offline|Status Unknow", and if I wanna this...

Unable to offline resourcce

Hi everyone, I'm facing a problem when I try to take offline a Service Group, the issue is that one of the services of the service group, cannot go offline and it enters into the following state "Unable to offline|Status Unknow", and if I wanna this...

SFW HA SQL patching process

SFW HA SQL patching process. we have implemented GCO with 2 node cluster on primary. and single node at DR site. we want to do windows and SQL patches updates . what would be the process,  starting node should be passive node or active node. how ...

Jomy by Level 5
Partner Accredited
  • 349 Views
  • 1 replies
  • 0 kudos

Resolved! How to prevent split brain issue in GCO

How to prevent split brain issue in GCO.   we have configured 2 cluster in primary and single node cluster in secondary. It is working fine but. when ever there is a link issue.Both the sites are going in active state and volumes are mounting on ...

Jomy by Level 5
Partner Accredited
  • 1287 Views
  • 4 replies
  • 0 kudos

Resolved! Improving disk mirroring

Hi Need some advice improving disk mirroring using SFW. According to the documentation you use “Configuration task performance tuning” for migrations only. Can it be used to improve day to disk mirroring? We already disabled Task Throttling and en...

Resolved! disk doesn't show up

Hi Team,   With regards to above change was implemented last week end, Change of the ports (Removing the old ports, adding the new one).   SAN end the new ports has been added & old one removed, after this some of the Disks were failed the after ...

jjustgood by Not applicable
  • 692 Views
  • 3 replies
  • 1 kudos

Resolved! Blue Disk Icon in SFWHA against disk

I would like to know whether the blue information icon that I am seeing on the passive node of a sfwha cluster will clear when a failover is initiated. The issue has arisen following a recent disk expansion which all went well apart from the odd iss...

slick1 by Level 2
  • 1412 Views
  • 5 replies
  • 0 kudos

Resolved! Firewall port requirement for VVR and GCO

Here I  have the list of firewall port requirement for GCO https://sort.symantec.com/public/documents/sfha/6.0.1/aix/productguides/html/vcs_install/apas01.htm we are using 4 IP's at one site and each of the will be from same subnet . physical IP- ...

Jomy by Level 5
Partner Accredited
  • 1163 Views
  • 2 replies
  • 0 kudos

VVR Block Pending Status

Hi, Professional I would like to get the answer and solution with this detail. My customer using VVR 3.3 on windows 2003 and all service all fine but there are lag of blocks change between primary and second but I'm new in this product and I have n...

Resolved! Cannot log a technical support case

Hi, My customer has a valid support contract for Symantec VRTS Storage Foundation 6.0 for Windows.  She has registered her porduct licences with her SymAccount. When she tries to log a support case online through https://my.symantec.com/webapp/faces/...

sukrui by Level 3
  • 1240 Views
  • 4 replies
  • 2 kudos