cancel
Showing results for 
Search instead for 
Did you mean: 

VxVM vxdg ERROR V-5-1-585 Unable to create shared disk group

brucemcgill_n1
Level 4

Hi,

To setup SFRAC, I need to configure I/O fencing on a 2-node VCS configuration. I am unable to create the shared diskgroup after configuring I/O Fencing. Without I/O Fencing, I am able to create the shared dikgroup. The error is:  VxVM vxdg ERROR V-5-1-585 Disk group oradg: cannot create: Record not in disk group

The two SPARC v400 servers "node1" and "node2 are connected to a Sun StorageTek 6140 array and the details are as follows:

On "node1":

node1 * / # vxdisk -e list
DEVICE       TYPE           DISK        GROUP        STATUS               OS_NATIVE_NAME   ATTR
disk_0       auto:none      -            -           online invalid       c1t3d0s2         -
disk_1       auto:none      -            -           online invalid       c1t2d0s2         -
disk_2       auto:cdsdisk   disk_2       vxfencoorddg online               c2t6d0s2         -
disk_3       auto:cdsdisk   disk_3       vxfencoorddg online               c2t7d0s2         -
disk_4       auto:cdsdisk   -            -           online               c2t0d0s2         -
disk_5       auto:cdsdisk   disk_5       vxfencoorddg online               c2t5d0s2         -
disk_6       auto:cdsdisk   -            -           online               c2t3d0s2         -
disk_7       auto:none      -            -           online invalid       c2t1d0s2         -
disk_8       auto:cdsdisk   -            -           online               c2t2d0s2         -
disk_9       auto:none      -            -           online invalid       c2t4d0s2         -
disk_10      auto:none      -            -           online invalid       c1t1d0s2         -
disk_11      auto:ZFS       -            -           ZFS                  c1t0d0s2         -
 

On "node2":

node2 * / # vxdisk -e list
DEVICE       TYPE           DISK        GROUP        STATUS               OS_NATIVE_NAME   ATTR
disk_0       auto:none      -            -           online invalid       c1t3d0s2         -
disk_1       auto:none      -            -           online invalid       c1t1d0s2         -
disk_2       auto:ZFS       -            -           ZFS                  c1t0d0s2         -
disk_3       auto:cdsdisk   -            -           online               c3t6d0s2         -
disk_4       auto:cdsdisk   -            -           online               c3t7d0s2         -
disk_5       auto:cdsdisk   -            -           error                c3t0d0s2         -
disk_6       auto:cdsdisk   -            -           online               c3t5d0s2         -
disk_7       auto:cdsdisk   -            -           online               c3t3d0s2         -
disk_8       auto:none      -            -           online invalid       c3t1d0s2         -
disk_9       auto:cdsdisk   -            -           online               c3t2d0s2         -
disk_10      auto:none      -            -           online invalid       c3t4d0s2         -
disk_11      auto:none      -            -           online invalid       c1t2d0s2         -
 

On "node1":

node1 * / # vxdg -s init oradg oradg01=disk_4
VxVM vxdg ERROR V-5-1-585 Disk group oradg: cannot create: Record not in disk group

node1 * / # vxdg -s init oradg oradg01=disk_8
VxVM vxdg ERROR V-5-1-585 Disk group oradg: cannot create: Record not in disk group
 

I have installed the latest ASL libraries for StorageTek 6140 array. Can anyone please help?

 

Best Regards,

Bruce

21 REPLIES 21

brucemcgill_n1
Level 4

Hi,

As mentione earlier, the storagetek array is without a controller. This may be the reason the array is not being recognized. I am not using Solaris MPXIO. Following is the output:

node1 * / # vxdmpadm listapm all
Filename           APM Name           APM Version  Array Types       State
================================================================================
dmpsvc             dmpsvc                 1        IBMSVC-ALUA       Not-Active
dmpaa              dmpaa                  1        A/A               Active
dmpinv             dmpinv                 1        Inv-A/A           Not-Active
dmpinv             dmpinv                 1        VPLEX-A/A         Not-Active
dmpjbod            dmpjbod                1        Disk              Active
dmpjbod            dmpjbod                1        APdisk            Active
dmpalua            dmpalua                1        ALUA              Not-Active
dmphuawei          dmphuawei              1        A/A-A-HUAWEI      Not-Active
dmpsun7x10alua     dmpsun7x10alua         1        SUN7x10-ALUA      Not-Active
dmpCLARiiON        dmpCLARiiON            1        CLR-A/P           Not-Active
dmpCLARiiON        dmpCLARiiON            1        CLR-A/PF          Not-Active
dmpaaa             dmpaaa                 1        A/A-A             Not-Active
dmpapf             dmpapf                 1        A/PF-VERITAS      Not-Active
dmpapf             dmpapf                 1        A/PF-T3PLUS       Not-Active
dmpEngenio         dmpEngenio             1        A/PF-LSI          Not-Active
dmpap              dmpap                  1        A/P               Active
dmpap              dmpap                  1        A/P-C             Active
dmpapg             dmpapg                 1        A/PG              Not-Active
dmpapg             dmpapg                 1        A/PG-C            Not-Active


node1 * / # vxdmpadm list dmpnode dmpnodename=disk_3
dmpdev          = disk_3
state           = enabled
enclosure       = disk
cab-sno         = DISKS
asl             = jbod
vid             = SEAGATE
pid             = ST330055FSUN300G
array-name      = Disk
array-type      = Disk
iopolicy        = MinimumQ
avid            = -
lun-sno         = 303833385435583944350000
udid            = SEAGATE%5FST330055FSUN300G%5FDISKS%5F303833385435583944350000
dev-attr        = -
lun_type        = -
scsi3_vpd       = -
num_paths       = 2
###path         = name state type transport ctlr hwpath aportID aportWWN attr
path            = c2t7d0s2 enabled(a) - FC c2 /pci@1d,700000/SUNW,qlc@2/fp@0,0 - - -
path            = c3t7d0s2 enabled(a) - FC c3 /pci@1d,700000/SUNW,qlc@2,1/fp@0,0 - - -
 

Regards,

Bruce

Gaurav_S
Moderator
Moderator
   VIP    Certified

Just to double check, I had a look @ HCL for 6.0 & can see that storagetek 6140 is well supported with fencing ... so as such compatibility wise there should not be an issue ..

If you see this link:

https://sort.symantec.com/asl/details/557

libvxlsiall 2.0 SUN CSM100, CSM200, FLEXLINE 380, LCSM100_F, LCSM100_S, LCSM100_I, LSI 1532, LSI 1332, LSI 1333, STK6580_6780, SUN_6180 StorageTek 2510 array, StorageTek 2530 array, StorageTek 2540 array, StorageTek 6130 array, StorageTek 6140 array, Sun Storage 6180 array, Sun Storage 6580 array, Sun Storage 6780 array A/P, A/P-F

above should be library in use ...

Can u install package mentioned on above link & recheck ?

also, paste

# vxddladm listsupport all

# vxddladm listsupport libname=libvxlsiall

# pkginfo -l VRTSaslapm

# pkgchk VRTSaslapm

 

Gaurav