10-27-2010 09:45 PM
Accidentally rootdg of Veritas 3.5 is corrupted , When I try to re-create the rootdg using vxinstall command , it's showing below error
vxvm:vxconfigd: ERROR: enable failed: Configuration daemon error -1
No such file or directory; aborting
Failure during execution of command : vxconfigd -k -m disable
---------------------------
Tried to restart vxconfigd , getting same error as above
Solved! Go to Solution.
11-01-2010 10:30 PM
Hi Umesh,
Is rootdisk encapsulated under rootdg?
Do you have any volumes under rootdg that needs to be recovered?
If you are using a spare disk for rootdg and nothing to recover, the procedure is simple
Try the below.
# vxconfigd -m disable
# vxiod set 10
# vxdctl init
# vxdg init rootdg
# /etc/vx/bin/vxdisksetup -fi c#t#d#
# vxdg adddisk disk01=c#t#d#
# vxdctl enable
# vxdctl mode –> check for enabled
# vxdisk list –> check for DG’s imported
# rm /etc/vx/reconfig.d/state.d/install-db
Regards
Srini
10-28-2010 09:49 PM
Try to following steps in this doc:
http://slashzeroconf.wordpress.com/2008/01/20/how-to-disable-re-enable-vxvm-at-boot-time-when-the-boot-disk-is-encapsulated/
(The original Symantec TN http://seer.entsupport.symantec.com/docs/192620.htm was removed as 3.5 is no longer supported)
11-01-2010 10:30 PM
Hi Umesh,
Is rootdisk encapsulated under rootdg?
Do you have any volumes under rootdg that needs to be recovered?
If you are using a spare disk for rootdg and nothing to recover, the procedure is simple
Try the below.
# vxconfigd -m disable
# vxiod set 10
# vxdctl init
# vxdg init rootdg
# /etc/vx/bin/vxdisksetup -fi c#t#d#
# vxdg adddisk disk01=c#t#d#
# vxdctl enable
# vxdctl mode –> check for enabled
# vxdisk list –> check for DG’s imported
# rm /etc/vx/reconfig.d/state.d/install-db
Regards
Srini