I am very new to veritas. We have AIX 7.1 server using veritas DMP. When I look at the VIO all of the virtual fibre channel adapters are logged in, but on the lpar it is failing to see any disks on f...
Hello All,
The dmp 5.1SP1PR2 installation is completing but it unable to start it. getting follwing error
Veritas Dynamic Multi-Pathing Startup did not complete successfully
vxdmp...
Hi,
I have an question on scsi alua handler and VxDMP on Linux.
we have a scsi_dh_alua handler on linux, which can handle the ALUA related check conditions sent from target controllers. so this...
Dear Gents,
I have recently installed DMP 5.1 SP1 RP2 on a rhel 6.3 os x86_64, after the installation when i took a reboot the system got hung during the boot time. i found the follwoing erro...
Goodafternoon,
We are in the progress of doing an upgrade to our STKSUN 6180 disk array to firmware version 07.84.44.10. In the release notes of this firmware we run into the following challenge :...
Ok, I'm somewhat confused and the more I read the more confused I think I'm getting.
I'm going to be setting up a 4 node active/active cluster for SQL. All of the nodes will have 2 seperate f...
What is the recommended setting for the Load Balance Policy for a SQL environment? Or, where can I find more information about the available settings? Thanks!
Wondering why disk 2 show slice 2 whereas the other subpaths show only disk?
Does this mean that this disk has been formatted/labeled differently? They all should be labeled EFI.&nbs...
Hi!
I'm installing several new SFHACFS clusters and during the failover testing I run into annoying problem - when I fence one node of the cluster, DMP logs high number of path down/path u...
This is more like an informational question, since I do not assume anyone has a solution, but just in case I would be thankfull for some enlightment:
I am forced to use an old Version SF4.1MP4 in t...