10-26-2009 04:37 AM
When I set my backups up a year aog I never tested if they were compressing, just the fact that they were working with software encryption!
Now I need to compress as well so have changed to hardware encryption and hardware compression - throughput rates are not affected, and according to the docs I have seen all LTO4 drives should have the ability to do this (mine certainly does), basically BE passes the encryption key to the drive which holds it in memory, then compresses and encrypts as it writes. Neat!
Of course there are issues... the verify now does not report the correct set name! I can live with this, but after a few good backups the verify now also takes far too long - the backup is timing out!
Has anyone else out there used this configuration?
Can anyone suggest if this is a good or bad config?
Thanks in advance!
10-26-2009 05:16 AM
Frist some explanation on Hardware Encryption AND Hardware Compression
http://support.veritas.com/docs/309478
Backup Exec provides you with the ability to encrypt data.
When you encrypt data, you protect it from unauthorized access.Anyone that tries to access the data has to have an encryption key that you create.
Backup Exec provides software encryption, but it also supports some devices that provide hardware encryption with the T10 standard.
Backup Exec supports two security levels of encryption: 128-bit Advanced Encryption Standard (AES) and 256-bit AES. The 256-bit AES encryption provides a stronger level of security because the key is longer for 256-bit AES than for 128-bit AES. However, 128-bit AES encryption enables backup jobs to process more quickly.
Hardware encryption using the T10 standard requires 256-bit AES.
=========================================
http://support.veritas.com/docs/309476
About encryption
When you use hardware encryption, the data is transmitted from the host computer to the target device and then encrypted on the device. Backup Exec manages the encryption keys that are used to access the encrypted data.
Backup Exec only supports approved devices for T10 encryption.
Kindly VERIFY that your Tape DRIVE LTO 4 supports T10 >>>
=====================
REFER Document ID: 287662
http://support.veritas.com/docs/287662
Verifying the Hardware Compression Setting in Backup Exec for Windows Servers
===================
http://support.veritas.com/docs/309689 Improving Backup Exec performance
===================