12-22-2010 08:31 AM
I have configured the NBU appln 5200 as media server deduplication and only able to backup from media server to the remote appliance diskpool .
But when configure the media server to backup the netbackup client agent to the appliance puredisk it will failed with error code 48 with all necessary accessing configured on the media and aplliance bp.conf.
error as below.
12/22/2010 12:30:39 PM - requesting resource APP_StorageUnit05
12/22/2010 12:30:39 PM - requesting resource
sgp-netbackup01.NBULIENT.MAXJOBS.sgp-vereport01
12/22/2010 12:30:39 PM - requesting resource
netbackup01.NBU_POLICY.MAXJOBS.Test_Netbackup05
12/22/2010 12:30:39 PM - granted resource
netbackup01.NBU_CLIENT.MAXJOBS.vereport
12/22/2010 12:30:39 PM - granted resource
netbackup01.NBU_POLICY.MAXJOBS.Test_Netbackup05
12/22/2010 12:30:39 PM - granted resource
MediaID=@aaaaM;DiskVolume=PureDiskVolume;DiskPool=dp_disk_appliance01;Path=P
ureDiskVolume;StorageServer=appliance01;MediaServer=appliance01
12/22/2010 12:30:39 PM - granted resource APP_StorageUnit05
12/22/2010 12:30:39 PM - estimated 0 Kbytes needed
12/22/2010 12:30:40 PM - started process bpbrm (6858)
12/22/2010 12:30:40 PM - end writing
12/22/2010 8:28:32 PM - Error bpbrm(pid=6858) bpcd on vereport
exited with status 48: client hostname could not be found
client hostname could not be found(48)
Please advise.
Solved! Go to Solution.
02-28-2011 07:58 AM
a FQDN is reqiured for the appliance 5200 .
Once FQDN is used to configure problem solved if short name is used .
I will required to edit the pd cfg file on the Netbackup media server .
12-28-2010 11:24 AM
When you set up the logon credentials for the PureDisk volume, did you happen to specify the Storage Server as its fully qualified name (such as appliance01.mycompany.com) instead of its short name (just appliance01)? Is the reverse DNS lookup defined in DNS correctly?
48's are almost always some sort of DNS resolution issue. I usually hit them when a server name has been reused or changed after it gloes live.
02-20-2011 06:53 PM
Most likely the client is resolving NB5200's IP to a name that is not in client's bp.conf
OR
Your appliance is not able to resolve the name vereport. Is the appliance using a DNS server that knows about the name vereport and its correct IP address?
Warm regards,
Rasheed
02-28-2011 07:58 AM
a FQDN is reqiured for the appliance 5200 .
Once FQDN is used to configure problem solved if short name is used .
I will required to edit the pd cfg file on the Netbackup media server .