08-27-2013 04:05 AM
Hi All,
I got this message detail:
Solved! Go to Solution.
08-27-2013 05:27 AM
So do you have any drives configured that are hcart? Perhaps your storage unit was wrong and the drives are actually hcart2
The backup see you have hcart storgage unit, reserves the tapes, then goes to reserve a drive - oh! we have none available that are hcart!
Let's see the output of tpconfig -d on the media server "mysides" (tpconfig is located in volmgr/bin)
08-27-2013 04:09 AM
What about the policy, what storage unit is it using?
These tapes are all for TLD(0) and hcart2.
Lets see output of bppllist <policyname> -U
08-27-2013 04:15 AM
Here;s the outpout:
08-27-2013 04:28 AM
ok let's look at the output of
bpstulist -label mysides-hcart-robot-tld-0 -U
08-27-2013 04:30 AM
Here:
08-27-2013 04:57 AM
Hi, Revaroo
what do you think seems to be a problem? Pls advice.
08-27-2013 05:06 AM
Your tapes are set as hcart2, your storage unit is hcart - hence it requires hcart type tapes of which you have none in scratch. Change the the type for the tapes to hcart and it will work.
08-27-2013 05:18 AM
Hi, Revaroo
I've change the media type to HCART and run the backup. But now it got error:
08-27-2013 05:27 AM
So do you have any drives configured that are hcart? Perhaps your storage unit was wrong and the drives are actually hcart2
The backup see you have hcart storgage unit, reserves the tapes, then goes to reserve a drive - oh! we have none available that are hcart!
Let's see the output of tpconfig -d on the media server "mysides" (tpconfig is located in volmgr/bin)
08-27-2013 05:29 AM
Hi, Revaroo
Yeah, i have checked the storage unit and it's turn out wrong. So, I changed it to HCART2 instead the media or the drive. Now, the backup can run normally. Thank you very much for your help.
08-27-2013 05:31 AM
Sheriff, excellent, It was one of the 3 combinations (drive type, tape type or storage unit type).
Glad to be of help :)
05-22-2018 12:41 PM
Hi,
How did you change the Density?
05-22-2018 12:42 PM
So this post helped me to realize that the density is wrong. I can't figure out how to change it.
05-22-2018 12:47 PM