08-02-2014 06:35 AM
Dear Frineds ,
I have to configure san client in Cluster enviorment ,so as per SAN Client admin guide i ran the following command .
1. nbemmcmd –addhost –machinename virtual_name –machinetype app_cluster
2. nbemmcmd –updatehost –add_server_to_app_cluster –machinename client_name –clustername virtual_name
1st command ran sucessfully but 2nd command giving output that command didn't completed sucessfully.
Master Server is :- Windows 2008 R2 Enterprises.
FT Media is Linux
Client is AIX.
Note :- Client is not been configured as SAN client so far , like zoning and driver creation . i was running these command first but did not sucess .
Please Help
Thank You !!
Solved! Go to Solution.
08-02-2014 11:39 PM
if something JUST WORKED doesn't mean it should work .... there is process outlined thus need to follow steps
Its node which are actual SAN client not the virtual name...
virtual name is to get NBU understand SAN CLIENT are actually nodes of CLUSTER hence we create app cluster and add nodes in it.
Better remove app cluster for now..
start from beginning and let us know if you still face the same issue.
08-02-2014 07:21 AM
You first need to install NBU and configure SAN clients then add them in app cluster
refer this http://www.symantec.com/docs/HOWTO35943
http://www.symantec.com/docs/TECH153120
http://www.symantec.com/docs/HOWTO66272
FT services must be running on both nodes
if link is not loading google it for cached text version
08-02-2014 07:51 AM
Share the error
08-02-2014 12:50 PM
Hi Riaan ,
This is only error command didn't completed sucessfully..
Thank You
08-02-2014 12:51 PM
Jack ,
NBU is installed jast it is not configured as san client , without configured as san client you can not add in emm???
if not then why it add to virtual name of cluster and not to nodes ??
Thanks
08-02-2014 11:39 PM
if something JUST WORKED doesn't mean it should work .... there is process outlined thus need to follow steps
Its node which are actual SAN client not the virtual name...
virtual name is to get NBU understand SAN CLIENT are actually nodes of CLUSTER hence we create app cluster and add nodes in it.
Better remove app cluster for now..
start from beginning and let us know if you still face the same issue.
08-03-2014 12:24 AM
Hi Jack ,
After configuring as san client this command ran sucessfully .
Thanks You
08-03-2014 03:49 AM
glad to have you helped... hope you must be enjoying throughput of SAN client :)
08-03-2014 05:05 AM
Yes ,
:)
06-12-2021 12:08 PM
hi,
I´m facing the same problem could you tell me how did you "add as san client"